summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Makefile.in30
-rwxr-xr-xconfigure2259
-rw-r--r--configure.ac27
-rw-r--r--jim-eventloop.c6
-rw-r--r--jim-file.c1
-rw-r--r--jim-regexp.c3
-rw-r--r--jim-signal.c4
-rw-r--r--jim-syslog.c2
-rw-r--r--jim.c59
-rw-r--r--tests/error.test2
-rw-r--r--tests/regexp.test7
-rw-r--r--tests/scan.test667
-rw-r--r--tests/stacktrace.test16
13 files changed, 1868 insertions, 1215 deletions
diff --git a/Makefile.in b/Makefile.in
index cb8480e..f82ee4b 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -3,6 +3,9 @@ RANLIB ?= ranlib
# Configuration
jim_nofork := @JIM_NOFORK@
+jim_libtype := @JIM_LIBTYPE@
+SH_CFLAGS ?= @SH_CFLAGS@
+SH_LDFLAGS ?= @SH_LDFLAGS@
# Defines the extensions to include
EXTENSIONS := @JIM_EXTENSIONS@
@@ -12,12 +15,22 @@ CFLAGS += -DTCL_LIBRARY=\"/lib/tcl6\"
CFLAGS += -DJIM_TCL_COMPAT
-# Emulate tinytcl
-LIBJIM := libtcl6.a
-
CFLAGS += -Wall -g -Os $(OPTIM) -I@SRCDIR@ @EXTRA_CFLAGS@
VPATH := @SRCDIR@
+ifdef jim_nofork
+ CFLAGS += -DNO_FORK
+endif
+ifeq ($(jim_libtype),static)
+ # Emulate tinytcl
+ LIBJIM := libtcl6.a
+else
+ #LIBJIM := libjim_shared.so
+ LIBJIM := libtcl6.so
+ #CFLAGS += -fPIC
+ CFLAGS += $(SH_CFLAGS)
+endif
+
.EXPORT_ALL_VARIABLES:
OBJS := jim-subcmd.o jim-interactive.o jim.o
@@ -33,23 +46,24 @@ jim-%.c: %.tcl
echo $@ >>.clean
sh @SRCDIR@/make-c-ext.sh $@ $<
-ifdef jim_nofork
- CFLAGS += -DNO_FORK
-endif
-
OBJS += load_extensions.o
TARGETS += $(LIBJIM) jimsh
all: $(TARGETS)
- $(MAKE) -C doc all
+ if [ -d doc ]; then $(MAKE) -C doc all; fi
jimsh: $(LIBJIM) jimsh.o
$(CC) $(LDFLAGS) -o $@ jimsh.o $(LIBJIM) $(LDLIBS) $(LIBDL)
+ifeq ($(jim_libtype),static)
$(LIBJIM): $(OBJS) $(EXTENSIONS_OBJS)
$(AR) cr $@ $^
$(RANLIB) $@
+else
+$(LIBJIM): $(OBJS) $(EXTENSIONS_OBJS)
+ $(CC) $(LDFLAGS) $(SH_LDFLAGS) -o $@ $^
+endif
load_extensions.c: @SRCDIR@/make-jim-load-extensions.sh
sh @SRCDIR@/make-jim-load-extensions.sh $@ $(EXTENSIONS)
diff --git a/configure b/configure
index 53d0cb5..54bebf7 100755
--- a/configure
+++ b/configure
@@ -1,20 +1,22 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.62 for jim 0.60.
+# Generated by GNU Autoconf 2.64 for jim 0.60.
#
# Report bugs to <steveb@workware.net.au>.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
+#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -22,23 +24,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
esac
-
fi
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
as_nl='
'
export as_nl
@@ -46,7 +40,13 @@ export as_nl
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
@@ -57,7 +57,7 @@ else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
- case $arg in
+ case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -80,13 +80,6 @@ if test "${PATH_SEPARATOR+set}" != set; then
}
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
@@ -96,15 +89,15 @@ fi
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -116,12 +109,16 @@ if test "x$as_myself" = x; then
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
@@ -133,330 +130,299 @@ export LC_ALL
LANGUAGE=C
export LANGUAGE
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
# CDPATH.
-$as_unset CDPATH
-
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
else
- as_have_required=no
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
fi
-
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-if as_func_ret_success; then
- :
else
- exitcode=1
- echo as_func_ret_success failed.
+ exitcode=1; echo positional parameters were not saved.
fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
else
- exitcode=1
- echo positional parameters were not saved.
+ as_have_required=no
fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- case $as_dir in
+ as_found=:
+ case $as_dir in #(
/*)
for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
done;;
esac
+ as_found=false
done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
IFS=$as_save_IFS
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
fi
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: steveb@workware.net.au about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+ fi
+ exit 1
fi
-
-
fi
-
fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
-exitcode=0
-if as_func_success; then
- :
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
else
- exitcode=1
- echo as_func_success failed.
-fi
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-if as_func_ret_success; then
- :
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
else
- exitcode=1
- echo as_func_ret_success failed.
+ as_expr=false
fi
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
fi
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
else
- exitcode=1
- echo positional parameters were not saved.
+ as_dirname=false
fi
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell bug-autoconf@gnu.org about your system,
- echo including any error possibly output before this message.
- echo This can help us improve future autoconf versions.
- echo Configuration will now proceed without shell functions.
-}
-
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
@@ -473,8 +439,7 @@ test \$exitcode = 0") || {
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
@@ -484,29 +449,18 @@ test \$exitcode = 0") || {
exit
}
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
-n*)
- case `echo 'x\c'` in
+ case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
@@ -536,7 +490,7 @@ rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
+ as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
@@ -555,10 +509,10 @@ else
if test -d "$1"; then
test -d "$1/.";
else
- case $1 in
+ case $1 in #(
-*)set "./$1";;
esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
@@ -572,7 +526,6 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
exec 7<&0 </dev/null 6>&1
# Name of the host.
@@ -591,7 +544,6 @@ cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME='jim'
@@ -599,65 +551,78 @@ PACKAGE_TARNAME='jim'
PACKAGE_VERSION='0.60'
PACKAGE_STRING='jim 0.60'
PACKAGE_BUGREPORT='steveb@workware.net.au'
+PACKAGE_URL=''
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-TARGET_PLATFORM
-CC
-CFLAGS
-LDFLAGS
-CPPFLAGS
-ac_ct_CC
-EXEEXT
-OBJEXT
-SET_MAKE
-JIM_NOFORK
-JIM_EXTENSIONS
-EXTRA_CFLAGS
-SRCDIR
-LIBDL
+ac_subst_vars='LTLIBOBJS
LIBOBJS
-LTLIBOBJS'
+LIBDL
+SRCDIR
+EXTRA_CFLAGS
+JIM_LIBTYPE
+JIM_EXTENSIONS
+JIM_NOFORK
+SH_LDFLAGS
+SH_CFLAGS
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+SET_MAKE
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_fork
with_jim_ext
+with_jim_shared
'
ac_precious_vars='build_alias
host_alias
@@ -775,8 +740,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -802,8 +766,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1007,8 +970,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1024,8 +986,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1055,17 +1016,17 @@ do
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
+ -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
@@ -1082,16 +1043,14 @@ done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { $as_echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) { $as_echo "$as_me: error: Unrecognized options: $ac_unrecognized_opts" >&2
- { (exit 1); exit 1; }; } ;;
- *) $as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
@@ -1113,8 +1072,7 @@ do
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
@@ -1144,11 +1102,9 @@ test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { $as_echo "$as_me: error: Working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "pwd does not report name of working directory"
# Find the source files, if location was not specified.
@@ -1187,13 +1143,11 @@ else
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1275,6 +1229,10 @@ Fine tuning of the installation directories:
_ACEOF
cat <<\_ACEOF
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
_ACEOF
fi
@@ -1293,7 +1251,8 @@ Optional Features:
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-jim-ext Specify jim extensions to build (or all, which is the default)
+ --with-jim-ext Specify jim extensions to build (or all, which is the default)
+ --with-jim-shared Build a shared library instead of a static library
Some influential environment variables:
CC C compiler command
@@ -1371,21 +1330,175 @@ test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
jim configure 0.60
-generated by GNU Autoconf 2.62
+generated by GNU Autoconf 2.64
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_func
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by jim $as_me 0.60, which was
-generated by GNU Autoconf 2.62. Invocation command line was
+generated by GNU Autoconf 2.64. Invocation command line was
$ $0 $@
@@ -1421,8 +1534,8 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
-done
+ $as_echo "PATH: $as_dir"
+ done
IFS=$as_save_IFS
} >&5
@@ -1459,9 +1572,9 @@ do
ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ as_fn_append ac_configure_args1 " '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else
@@ -1477,13 +1590,13 @@ do
-* ) ac_must_keep_next=true ;;
esac
fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
+ as_fn_append ac_configure_args " '$ac_arg'"
;;
esac
done
done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
@@ -1508,13 +1621,13 @@ _ASBOX
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
+ *) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
@@ -1586,39 +1699,41 @@ _ASBOX
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h
+$as_echo "/* confdefs.h */" > confdefs.h
+
# Predefined preprocessor variables.
cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
@@ -1637,7 +1752,7 @@ for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
if test -r "$ac_site_file"; then
- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
@@ -1648,7 +1763,7 @@ if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
@@ -1656,7 +1771,7 @@ $as_echo "$as_me: loading cache $cache_file" >&6;}
esac
fi
else
- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
@@ -1671,11 +1786,11 @@ for ac_var in $ac_precious_vars; do
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
@@ -1685,17 +1800,17 @@ $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_old_val_w=`echo x $ac_old_val`
ac_new_val_w=`echo x $ac_new_val`
if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
ac_cache_corrupted=:
else
- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
eval $ac_var=\$ac_old_val
fi
- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
@@ -1707,41 +1822,20 @@ $as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
esac
fi
done
if $ac_cache_corrupted; then
- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -1751,9 +1845,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
-TARGET_PLATFORM=$ac_cv_host
-
-
# Checks for programs.
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -1763,9 +1854,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -1776,24 +1867,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -1803,9 +1894,9 @@ if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
@@ -1816,24 +1907,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -1842,12 +1933,8 @@ fi
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
@@ -1860,9 +1947,9 @@ if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -1873,24 +1960,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -1900,9 +1987,9 @@ fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -1914,18 +2001,18 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
@@ -1944,10 +2031,10 @@ fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -1959,9 +2046,9 @@ if test -z "$CC"; then
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$CC"; then
@@ -1972,24 +2059,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- { $as_echo "$as_me:$LINENO: result: $CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
$as_echo "$CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2003,9 +2090,9 @@ if test -z "$CC"; then
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_CC"; then
@@ -2016,24 +2103,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
$as_echo "$ac_ct_CC" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2046,12 +2133,8 @@ done
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet. If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
@@ -2061,71 +2144,55 @@ fi
fi
-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
set X $ac_compile
ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler --version >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -v >&5") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compiler -V >&5") 2>&5
- ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ rm -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-
+#include <stdio.h>
int
main ()
{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
-{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
$as_echo_n "checking for C compiler default output file name... " >&6; }
ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
@@ -2142,17 +2209,17 @@ do
done
rm -f $ac_rmfiles
-if { (ac_try="$ac_link_default"
+if { { ac_try="$ac_link_default"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link_default") 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
# Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
# in a Makefile. We should not override ac_cv_exeext if it was cached,
@@ -2169,7 +2236,7 @@ do
# certainly right.
break;;
*.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
then :; else
ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
fi
@@ -2188,80 +2255,75 @@ test "$ac_cv_exeext" = no && ac_cv_exeext=
else
ac_file=''
fi
-
-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
$as_echo "$ac_file" >&6; }
-if test -z "$ac_file"; then
+if test -z "$ac_file"; then :
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
fi
-
ac_exeext=$ac_cv_exeext
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
$as_echo_n "checking whether the C compiler works... " >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
if { ac_try='./$ac_file'
- { (case "(($ac_try" in
+ { { case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
(eval "$ac_try") 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
- { { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot run C compiled programs.
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+See \`config.log' for more details." "$LINENO" 5; }
fi
fi
fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
ac_clean_files=$ac_clean_files_save
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
$as_echo_n "checking whether we are cross compiling... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
$as_echo "$cross_compiling" >&6; }
-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
$as_echo_n "checking for suffix of executables... " >&6; }
-if { (ac_try="$ac_link"
+if { { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
# If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
@@ -2276,30 +2338,24 @@ for ac_file in conftest.exe conftest conftest.*; do
esac
done
else
- { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
fi
-
rm -f conftest$ac_cv_exeext
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
$as_echo "$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then
+if test "${ac_cv_objext+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -2311,17 +2367,17 @@ main ()
}
_ACEOF
rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
+if { { ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
(eval "$ac_compile") 2>&5
ac_status=$?
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
for ac_file in conftest.o conftest.obj conftest.*; do
test -f "$ac_file" || continue;
case $ac_file in
@@ -2334,29 +2390,23 @@ else
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
fi
-
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
$as_echo "$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
$as_echo_n "(cached) " >&6
else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -2370,37 +2420,16 @@ main ()
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
ac_compiler_gnu=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_compiler_gnu=no
+ ac_compiler_gnu=no
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
$as_echo "$ac_cv_c_compiler_gnu" >&6; }
if test $ac_compiler_gnu = yes; then
GCC=yes
@@ -2409,20 +2438,16 @@ else
fi
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
+if test "${ac_cv_prog_cc_g+set}" = set; then :
$as_echo_n "(cached) " >&6
else
ac_save_c_werror_flag=$ac_c_werror_flag
ac_c_werror_flag=yes
ac_cv_prog_cc_g=no
CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -2433,35 +2458,11 @@ main ()
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_g=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- CFLAGS=""
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -2472,36 +2473,12 @@ main ()
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
- :
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_compile "$LINENO"; then :
- ac_c_werror_flag=$ac_save_c_werror_flag
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
CFLAGS="-g"
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -2512,42 +2489,17 @@ main ()
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_g=yes
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_c_werror_flag=$ac_save_c_werror_flag
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
$as_echo "$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
@@ -2564,18 +2516,14 @@ else
CFLAGS=
fi
fi
-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
$as_echo_n "(cached) " >&6
else
ac_cv_prog_cc_c89=no
ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
@@ -2632,32 +2580,9 @@ for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_compile") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then
+ if ac_fn_c_try_compile "$LINENO"; then :
ac_cv_prog_cc_c89=$ac_arg
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
fi
-
rm -f core conftest.err conftest.$ac_objext
test "x$ac_cv_prog_cc_c89" != "xno" && break
done
@@ -2668,17 +2593,19 @@ fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c89" in
x)
- { $as_echo "$as_me:$LINENO: result: none needed" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
$as_echo "none needed" >&6; } ;;
xno)
- { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
$as_echo "unsupported" >&6; } ;;
*)
CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -2686,11 +2613,11 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
@@ -2708,21 +2635,129 @@ esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
SET_MAKE=
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
+# Shared library support. Because we don't believe in automake!
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ for ac_t in install-sh install.sh shtool; do
+ if test -f "$ac_dir/$ac_t"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/$ac_t -c"
+ break 2
+ fi
+ done
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+case $host in
+*-*-darwin*)
+ SH_CFLAGS=-dynamic
+
+ SH_LDFLAGS="-dynamiclib -undefined suppress -flat_namespace"
+;;
+*)
+ SH_CFLAGS=-fPIC
+
+ SH_LDFLAGS=-shared
+;;
+esac
+
# Check whether --enable-fork was given.
-if test "${enable_fork+set}" = set; then
+if test "${enable_fork+set}" = set; then :
enableval=$enable_fork;
if test "x$enableval" = "xno" ; then
- { $as_echo "$as_me:$LINENO: result: * disabling fork" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: * disabling fork" >&5
$as_echo "* disabling fork" >&6; }
JIM_NOFORK=1
fi
@@ -2735,7 +2770,7 @@ JIM_NOFORK=$JIM_NOFORK
jim_extensions="package readdir glob array clock exec file posix regexp signal tcl6 aio bio eventloop syslog"
# Check whether --with-jim-ext was given.
-if test "${with_jim_ext+set}" = set; then
+if test "${with_jim_ext+set}" = set; then :
withval=$with_jim_ext;
if test "x$withval" != "xno" ; then
if test "x$withval" != "xall" ; then
@@ -2746,7 +2781,7 @@ if test "${with_jim_ext+set}" = set; then
fi
-{ $as_echo "$as_me:$LINENO: result: enabling jim extensions: $jim_extensions" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: enabling jim extensions: $jim_extensions" >&5
$as_echo "enabling jim extensions: $jim_extensions" >&6; }
JIM_EXTENSIONS=$jim_extensions
@@ -2754,127 +2789,47 @@ for i in $jim_extensions; do
EXTRA_CFLAGS="$EXTRA_CFLAGS -Dwith_jim_ext_$i"
done
+JIM_LIBTYPE=static
+# Check whether --with-jim-shared was given.
+if test "${with_jim_shared+set}" = set; then :
+ withval=$with_jim_shared;
+ if test "x$withval" = "xyes" ; then
+ JIM_LIBTYPE=shared
+ fi
-for ac_func in ualarm
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
+fi
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+JIM_LIBTYPE=$JIM_LIBTYPE
-#undef $ac_func
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
-int
-main ()
-{
-return $ac_func ();
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
- eval "$as_ac_var=yes"
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- eval "$as_ac_var=no"
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
- $as_echo "$as_val"'`
- { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-if test `eval 'as_val=${'$as_ac_var'}
- $as_echo "$as_val"'` = yes; then
+for ac_func in ualarm
+do :
+ ac_fn_c_check_func "$LINENO" "ualarm" "ac_cv_func_ualarm"
+if test "x$ac_cv_func_ualarm" = x""yes; then :
cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+#define HAVE_UALARM 1
_ACEOF
EXTRA_CFLAGS="$EXTRA_CFLAGS -DHAVE_UALARM"
fi
done
-JIM_EXTENSIONS=$JIM_EXTENSIONS
-
EXTRA_CFLAGS=$EXTRA_CFLAGS
SRCDIR=`dirname $0`
-{ $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
@@ -2892,43 +2847,18 @@ return dlopen ();
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
- (eval "$ac_link") 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then
+if ac_fn_c_try_link "$LINENO"; then :
ac_cv_lib_dl_dlopen=yes
else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_cv_lib_dl_dlopen=no
+ ac_cv_lib_dl_dlopen=no
fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
- conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test $ac_cv_lib_dl_dlopen = yes; then
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
LIBDL=-ldl
fi
@@ -2963,13 +2893,13 @@ _ACEOF
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
+ *) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
@@ -2977,8 +2907,8 @@ $as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
(set) 2>&1 |
case $as_nl`(ac_space=' '; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
@@ -3001,11 +2931,11 @@ $as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
test "x$cache_file" != "x/dev/null" &&
- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
@@ -3061,8 +2991,8 @@ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
@@ -3074,9 +3004,10 @@ LTLIBOBJS=$ac_ltlibobjs
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
@@ -3086,17 +3017,18 @@ cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
debug=false
ac_cs_recheck=false
ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -3104,23 +3036,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
esac
-
fi
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
as_nl='
'
export as_nl
@@ -3128,7 +3052,13 @@ export as_nl
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
@@ -3139,7 +3069,7 @@ else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
- case $arg in
+ case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -3162,13 +3092,6 @@ if test "${PATH_SEPARATOR+set}" != set; then
}
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
@@ -3178,15 +3101,15 @@ fi
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -3198,12 +3121,16 @@ if test "x$as_myself" = x; then
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- { (exit 1); exit 1; }
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
@@ -3215,7 +3142,89 @@ export LC_ALL
LANGUAGE=C
export LANGUAGE
-# Required to use basename.
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -3229,8 +3238,12 @@ else
as_basename=false
fi
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
-# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
@@ -3250,76 +3263,25 @@ $as_echo X/"$0" |
}
s/.*/./; q'`
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
-n*)
- case `echo 'x\c'` in
+ case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
@@ -3348,8 +3310,56 @@ fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
+ as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
@@ -3368,10 +3378,10 @@ else
if test -d "$1"; then
test -d "$1/.";
else
- case $1 in
+ case $1 in #(
-*)set "./$1";;
esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
@@ -3386,13 +3396,19 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-# Save the log message, to keep $[0] and so on meaningful, and to
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by jim $as_me 0.60, which was
-generated by GNU Autoconf 2.62. Invocation command line was
+generated by GNU Autoconf 2.64. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -3405,6 +3421,12 @@ on `(hostname || uname -n) 2>/dev/null | sed 1q`
_ACEOF
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
# Files that config.status was made for.
config_files="$ac_config_files"
@@ -3413,32 +3435,34 @@ _ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
- -q, --quiet do not print progress messages
+ -q, --quiet, --silent
+ do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
+ --file=FILE[:TEMPLATE]
instantiate the configuration file FILE
Configuration files:
$config_files
-Report bugs to <bug-autoconf@gnu.org>."
+Report bugs to <steveb@workware.net.au>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
jim config.status 0.60
-configured by $0, generated by GNU Autoconf 2.62,
+configured by $0, generated by GNU Autoconf 2.64,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -3478,7 +3502,7 @@ do
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h | --help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
@@ -3487,11 +3511,10 @@ do
ac_cs_silent=: ;;
# This is an error.
- -*) { $as_echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
+ -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
- *) ac_config_targets="$ac_config_targets $1"
+ *) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
@@ -3539,9 +3562,7 @@ do
case $ac_config_target in
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
+ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
@@ -3566,7 +3587,7 @@ $debug ||
trap 'exit_status=$?
{ test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
+ trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
@@ -3577,11 +3598,7 @@ $debug ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} ||
-{
- $as_echo "$as_me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
@@ -3589,10 +3606,16 @@ $debug ||
if test -n "$CONFIG_FILES"; then
-ac_cr=' '
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
+ ac_cs_awk_cr='\r'
else
ac_cs_awk_cr=$ac_cr
fi
@@ -3606,23 +3629,18 @@ _ACEOF
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` = $ac_delim_num; then
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
@@ -3711,9 +3729,7 @@ if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
else
cat
fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error "could not setup config files machinery" "$LINENO" 5
_ACEOF
# VPATH may cause trouble with some makes, so we remove $(srcdir),
@@ -3744,9 +3760,7 @@ do
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-$as_echo "$as_me: error: Invalid tag $ac_tag." >&2;}
- { (exit 1); exit 1; }; };;
+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
@@ -3774,12 +3788,10 @@ $as_echo "$as_me: error: Invalid tag $ac_tag." >&2;}
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- ac_file_inputs="$ac_file_inputs '$ac_f'"
+ as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
@@ -3790,7 +3802,7 @@ $as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
`' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
fi
# Neutralize special characters interpreted by sed in replacement strings.
@@ -3803,9 +3815,7 @@ $as_echo "$as_me: creating $ac_file" >&6;}
case $ac_tag in
*:-:* | *:-) cat >"$tmp/stdin" \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; } ;;
+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
@@ -3833,47 +3843,7 @@ $as_echo X"$ac_file" |
q
}
s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
+ as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
@@ -3921,7 +3891,6 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
-
ac_sed_dataroot='
/datarootdir/ {
p
@@ -3931,12 +3900,11 @@ ac_sed_dataroot='
/@docdir@/p
/@infodir@/p
/@localedir@/p
-/@mandir@/p
-'
+/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
@@ -3946,7 +3914,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
+ s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF
@@ -3973,14 +3941,12 @@ s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined." >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined." >&2;}
@@ -3990,9 +3956,7 @@ which seems to be undefined. Please make sure it is defined." >&2;}
-) cat "$tmp/out" && rm -f "$tmp/out";;
*) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
esac \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
;;
@@ -4002,15 +3966,12 @@ $as_echo "$as_me: error: could not create $ac_file" >&2;}
done # for ac_tag
-{ (exit 0); exit 0; }
+as_fn_exit 0
_ACEOF
-chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
@@ -4031,10 +3992,10 @@ if test "$no_create" != yes; then
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
+ $ac_cs_success || as_fn_exit $?
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:$LINENO: WARNING: Unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi
diff --git a/configure.ac b/configure.ac
index f4eeb53..d3ca0bd 100644
--- a/configure.ac
+++ b/configure.ac
@@ -4,12 +4,21 @@
AC_PREREQ(2.57)
AC_INIT([jim], [0.60], [steveb@workware.net.au])
-AC_SUBST(TARGET_PLATFORM,$ac_cv_host)
-
# Checks for programs.
AC_PROG_CC
AC_PROG_MAKE_SET
+# Shared library support. Because we don't believe in automake!
+AC_CANONICAL_HOST
+case $host in
+*-*-darwin*)
+ AC_SUBST(SH_CFLAGS,-dynamic)
+ AC_SUBST(SH_LDFLAGS,"-dynamiclib -undefined suppress -flat_namespace");;
+*)
+ AC_SUBST(SH_CFLAGS,-fPIC)
+ AC_SUBST(SH_LDFLAGS,-shared);;
+esac
+
AC_ARG_ENABLE(fork,
[ --disable-fork Do not use fork (no exec, etc.)],
[
@@ -23,7 +32,7 @@ AC_SUBST(JIM_NOFORK,$JIM_NOFORK)
jim_extensions="package readdir glob array clock exec file posix regexp signal tcl6 aio bio eventloop syslog"
AC_ARG_WITH(jim-ext,
- [ --with-jim-ext Specify jim extensions to build (or all, which is the default)],
+ [ --with-jim-ext Specify jim extensions to build (or all, which is the default)],
[
if test "x$withval" != "xno" ; then
if test "x$withval" != "xall" ; then
@@ -39,9 +48,19 @@ for i in $jim_extensions; do
EXTRA_CFLAGS="$EXTRA_CFLAGS -Dwith_jim_ext_$i"
done
+JIM_LIBTYPE=static
+AC_ARG_WITH(jim-shared,
+ [ --with-jim-shared Build a shared library instead of a static library],
+ [
+ if test "x$withval" = "xyes" ; then
+ JIM_LIBTYPE=shared
+ fi
+ ]
+)
+AC_SUBST(JIM_LIBTYPE,$JIM_LIBTYPE)
+
AC_CHECK_FUNCS([ualarm],EXTRA_CFLAGS="$EXTRA_CFLAGS -DHAVE_UALARM")
-AC_SUBST(JIM_EXTENSIONS,$JIM_EXTENSIONS)
AC_SUBST(EXTRA_CFLAGS,$EXTRA_CFLAGS)
AC_SUBST(SRCDIR,`dirname $0`)
diff --git a/jim-eventloop.c b/jim-eventloop.c
index 6295d42..60cafbb 100644
--- a/jim-eventloop.c
+++ b/jim-eventloop.c
@@ -335,7 +335,7 @@ int Jim_ProcessEvents(Jim_Interp *interp, int flags)
{
int mask = 0;
- if (fe->mask & JIM_EVENT_READABLE && FD_ISSET(fd, &rfds)) {
+ if ((fe->mask & JIM_EVENT_READABLE) && FD_ISSET(fd, &rfds)) {
mask |= JIM_EVENT_READABLE;
if ((fe->mask & JIM_EVENT_FEOF) && feof(fe->handle))
mask |= JIM_EVENT_FEOF;
@@ -472,13 +472,13 @@ static int JimELAfterCommand(Jim_Interp *interp, int argc,
jim_wide ms, id;
Jim_Obj *objPtr, *idObjPtr;
const char *options[] = {
- "info", "cancel", "restart", "expire", NULL
+ "info", "cancel", NULL
};
enum {INFO, CANCEL, RESTART, EXPIRE, CREATE };
int option = CREATE ;
if (argc < 3) {
- Jim_WrongNumArgs(interp, 1, argv, "<after milliseconds> script");
+ Jim_WrongNumArgs(interp, 1, argv, "<after milliseconds> script|cancel <id>");
return JIM_ERR;
}
if (Jim_GetWide(interp, argv[1], &ms) != JIM_OK)
diff --git a/jim-file.c b/jim-file.c
index f87ba7f..fdecccf 100644
--- a/jim-file.c
+++ b/jim-file.c
@@ -478,6 +478,7 @@ static int file_cmd_readlink(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
Jim_AppendStrings(interp, Jim_GetResult(interp), "couldn't readlink \"", path, "\"", NULL);
return JIM_ERR;
}
+ linkValue[linkLength] = 0;
Jim_SetResult(interp, Jim_NewStringObjNoAlloc(interp, linkValue, linkLength));
return JIM_OK;
}
diff --git a/jim-regexp.c b/jim-regexp.c
index b8a7585..e161d37 100644
--- a/jim-regexp.c
+++ b/jim-regexp.c
@@ -47,8 +47,9 @@
* express or implied warranty.
*/
-#include <regex.h>
+#include <stdlib.h>
#include <string.h>
+#include <regex.h>
#define JIM_EXTENSION
#include "jim.h"
diff --git a/jim-signal.c b/jim-signal.c
index 1d21d59..7eb4a1f 100644
--- a/jim-signal.c
+++ b/jim-signal.c
@@ -385,7 +385,7 @@ static int Jim_AlarmCmd(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
ret = Jim_GetDouble(interp, argv[1], &t);
if (ret == JIM_OK) {
- if (t < 10) {
+ if (t < 1) {
ualarm(t * 1e6, 0);
}
else {
@@ -418,7 +418,7 @@ static int Jim_SleepCmd(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
ret = Jim_GetDouble(interp, argv[1], &t);
if (ret == JIM_OK) {
- if (t < 10) {
+ if (t < 1) {
usleep(t * 1e6);
}
else {
diff --git a/jim-syslog.c b/jim-syslog.c
index 4a039ef..29f4d9c 100644
--- a/jim-syslog.c
+++ b/jim-syslog.c
@@ -45,7 +45,6 @@ static const char *priorities[] = {
[LOG_EMERG] = "emerg",
[LOG_ALERT] = "alert",
[LOG_CRIT] = "crit",
- [LOG_ERR] = "err",
[LOG_ERR] = "error",
[LOG_WARNING] = "warning",
[LOG_NOTICE] = "notice",
@@ -126,7 +125,6 @@ wrongargs:
closelog();
info->logOpened=0;
}
- continue;
}
else if (Jim_CompareStringImmediate(interp, argv[i], "-ident")) {
strncpy(info->ident, Jim_GetString(argv[i+1], NULL), sizeof(info->ident));
diff --git a/jim.c b/jim.c
index 8d6230d..4f8a500 100644
--- a/jim.c
+++ b/jim.c
@@ -1600,7 +1600,7 @@ static int JimEscape(char *dest, const char *s, int slen)
}
}
len = p-dest;
- *p++ = '\0';
+ *p = '\0';
return len;
}
@@ -2245,7 +2245,6 @@ static void trim_right(char *str, const char *trimchars)
while (p != end) {
c = *p;
if (strchr(trimchars, c) == 0) {
- end = p;
break;
}
p--;
@@ -2313,12 +2312,12 @@ static Jim_Obj *JimStringTrimRight(Jim_Interp *interp, Jim_Obj *strObjPtr, Jim_O
static Jim_Obj *Jim_FormatString_Inner(Jim_Interp *interp, Jim_Obj *fmtObjPtr,
int objc, Jim_Obj *const *objv, char *sprintf_buf)
{
- const char *fmt, *_fmt;
+ const char *fmt;
int fmtLen;
Jim_Obj *resObjPtr;
- _fmt = fmt = Jim_GetString(fmtObjPtr, &fmtLen);
+ fmt = Jim_GetString(fmtObjPtr, &fmtLen);
resObjPtr = Jim_NewStringObj(interp, "", 0);
while (fmtLen) {
const char *p = fmt;
@@ -2790,10 +2789,10 @@ typedef struct ScriptToken {
* The precomputation of the command structure makes Jim_Eval() faster,
* and simpler because there aren't dynamic lengths / allocations.
*
- * -- {expand} handling --
+ * -- {expand}/{*} handling --
*
* Expand is handled in a special way. When a command
- * contains at least an argument with the {expand} prefix,
+ * contains at least an argument with the {expand} or {*} prefix,
* the command structure presents a -1 before the integer
* describing the number of arguments. This is used in order
* to send the command exection to a different path in case
@@ -3059,13 +3058,9 @@ int SetScriptFromAny(Jim_Interp *interp, struct Jim_Obj *objPtr)
/* Compute the command structure array
* (see the ScriptObj struct definition for more info) */
- start = 0; /* Current command start token index */
end = -1; /* Current command end token index */
while (1) {
- int expand = 0; /* expand flag. set to 1 on {expand} form. */
- int interpolation = 0; /* set to 1 if there is at least one
- argument of the command obtained via
- interpolation of more tokens. */
+ int expand = 0; /* expand flag. set to 1 on {expand} or {*} form. */
/* Search for the end of command, while
* count the number of args. */
start = ++end;
@@ -3086,7 +3081,6 @@ int SetScriptFromAny(Jim_Interp *interp, struct Jim_Obj *objPtr)
args++;
end++;
}
- interpolation = !((end-start+1) == args*2);
/* Add the 'number of arguments' info into cmdstruct.
* Negative value if there is list expansion involved. */
if (expand)
@@ -3917,7 +3911,7 @@ void DupDictSubstInternalRep(Jim_Interp *interp, Jim_Obj *srcPtr,
* the [dict]ionary contained in variable VARNAME. */
Jim_Obj *Jim_ExpandDictSugar(Jim_Interp *interp, Jim_Obj *objPtr)
{
- Jim_Obj *varObjPtr, *keyObjPtr, *dictObjPtr, *resObjPtr;
+ Jim_Obj *varObjPtr, *keyObjPtr, *dictObjPtr, *resObjPtr = NULL;
Jim_Obj *substKeyObjPtr = NULL;
if (objPtr->typePtr != &dictSubstObjType) {
@@ -3937,12 +3931,10 @@ Jim_Obj *Jim_ExpandDictSugar(Jim_Interp *interp, Jim_Obj *objPtr)
dictObjPtr = Jim_GetVariable(interp,
objPtr->internalRep.dictSubstValue.varNameObjPtr, JIM_ERRMSG);
if (!dictObjPtr) {
- resObjPtr = NULL;
goto err;
}
if (Jim_DictKey(interp, dictObjPtr, substKeyObjPtr, &resObjPtr, JIM_ERRMSG)
!= JIM_OK) {
- resObjPtr = NULL;
goto err;
}
err:
@@ -4791,15 +4783,18 @@ void Jim_ReleaseSharedString(Jim_Interp *interp, const char *str)
long refCount;
Jim_HashEntry *he = Jim_FindHashEntry(&interp->sharedStrings, str);
- if (he == NULL)
+ if (he == NULL) {
Jim_Panic(interp,"Jim_ReleaseSharedString called with "
"unknown shared string '%s'", str);
- refCount = (long) he->val;
- refCount--;
- if (refCount == 0) {
- Jim_DeleteHashEntry(&interp->sharedStrings, str);
- } else {
- he->val = (void*) refCount;
+ }
+ else {
+ refCount = (long) he->val;
+ refCount--;
+ if (refCount == 0) {
+ Jim_DeleteHashEntry(&interp->sharedStrings, str);
+ } else {
+ he->val = (void*) refCount;
+ }
}
}
@@ -6018,7 +6013,6 @@ int Jim_DictPairs(Jim_Interp *interp, Jim_Obj *dictPtr, Jim_Obj ***objPtrPtr, in
int Jim_DictKeysVector(Jim_Interp *interp, Jim_Obj *dictPtr,
Jim_Obj *const *keyv, int keyc, Jim_Obj **objPtrPtr, int flags)
{
- Jim_Obj *objPtr;
int i;
if (keyc == 0) {
@@ -6027,12 +6021,13 @@ int Jim_DictKeysVector(Jim_Interp *interp, Jim_Obj *dictPtr,
}
for (i = 0; i < keyc; i++) {
+ Jim_Obj *objPtr;
if (Jim_DictKey(interp, dictPtr, keyv[i], &objPtr, flags)
!= JIM_OK)
return JIM_ERR;
dictPtr = objPtr;
}
- *objPtrPtr = objPtr;
+ *objPtrPtr = dictPtr;
return JIM_OK;
}
@@ -6742,7 +6737,9 @@ static void ExprMakeLazy(Jim_Interp *interp, ExprByteCode *expr)
if (op == NULL) {
Jim_Panic(interp,"Default reached in ExprMakeLazy()");
}
- arity += op->arity;
+ else {
+ arity += op->arity;
+ }
break;
}
arity--;
@@ -6896,7 +6893,7 @@ int SetExprFromAny(Jim_Interp *interp, struct Jim_Obj *objPtr)
while (Jim_StackLen(&stack)) {
char *opstr = Jim_StackPop(&stack);
op = JimExprOperatorInfo(opstr);
- if (op == NULL && !strcmp(opstr, "(")) {
+ if (op == NULL) {
Jim_Free(opstr);
Jim_SetResultString(interp, "Missing close parenthesis", -1);
goto err;
@@ -7573,8 +7570,7 @@ static int SetScanFmtFromAny(Jim_Interp *interp, Jim_Obj *objPtr)
for (prev=0; prev < curr; ++prev) {
if (fmtObj->descr[prev].pos == -1) continue;
if (fmtObj->descr[prev].pos == descr->pos) {
- fmtObj->error = "same \"%n$\" conversion specifier "
- "used more than once";
+ fmtObj->error = "variable is assigned by multiple \"%n$\" conversion specifiers";
return JIM_ERR;
}
}
@@ -7642,7 +7638,7 @@ static int SetScanFmtFromAny(Jim_Interp *interp, Jim_Obj *objPtr)
}
done:
if (fmtObj->convCount == 0) {
- fmtObj->error = "no any conversion specifier given";
+ fmtObj->error = "variable is not assigned by any conversion specifiers";
return JIM_ERR;
}
return JIM_OK;
@@ -8263,7 +8259,6 @@ static int JimAddErrorToStack(Jim_Interp *interp, int retcode, const char *filen
if (retcode == JIM_ERR_ADDSTACK) {
/* Add the stack info for the current level */
JimAppendStackTrace(interp, Jim_GetString(interp->errorProc, NULL), filename, line);
- retcode = JIM_ERR;
}
Jim_DecrRefCount(interp, interp->errorProc);
@@ -8922,7 +8917,6 @@ int Jim_SubstObj(Jim_Interp *interp, Jim_Obj *substObjPtr,
case JIM_TT_DICTSUGAR:
objPtr = Jim_ExpandDictSugar(interp, token[i].objPtr);
if (!objPtr) {
- retcode = JIM_ERR;
goto err;
}
break;
@@ -10525,7 +10519,6 @@ static int Jim_UplevelCoreCommand(Jim_Interp *interp, int argc,
return JIM_ERR;
}
if (argc < 2) {
- argc++;
argv--;
Jim_WrongNumArgs(interp, 1, argv,
"?level? command ?arg ...?");
@@ -11613,7 +11606,7 @@ static int Jim_ScanCoreCommand(Jim_Interp *interp, int argc,
int outc, i, count = 0;
if (argc < 3) {
- Jim_WrongNumArgs(interp, 1, argv, "string formatString ?varName ...?");
+ Jim_WrongNumArgs(interp, 1, argv, "string format ?varName varName ...?");
return JIM_ERR;
}
if (argv[2]->typePtr != &scanFmtStringObjType)
diff --git a/tests/error.test b/tests/error.test
index 0bcd0da..3a4b44f 100644
--- a/tests/error.test
+++ b/tests/error.test
@@ -50,4 +50,4 @@ test error-1.2 "Modify stacktrace" {
# Package should be able to invoke exit, which should exit if not caught
test error-2.1 "Exit from package" {
list [catch {package require exitpackage} msg] $msg
-} {7 {Can't find package 'exitpackage'}}
+} {7 {Can't load package 'exitpackage'}}
diff --git a/tests/regexp.test b/tests/regexp.test
index 7832474..037fc8e 100644
--- a/tests/regexp.test
+++ b/tests/regexp.test
@@ -28,16 +28,15 @@ test regexp-1.1 {effect of caching} {
set t1 [lindex $t1 0]
set t2 [lindex $t2 0]
- #puts "t1=$t1, t2=$t2"
+ puts "t1=$t1, t2=$t2"
# If these two times are within 20% of each other, caching isn't working
- expr {$t2 / $t1 < 1.2 && $t1 / $t2 < 1.2}
+ expr {$t2 * 1.0 / $t1 < 1.2 && $t1 * 1.0 / $t2 < 1.2}
} {0}
test regexp-1.2 {Non-ascii} {
set nbsp [format %c 0xa0]
set string [format "abc%cdef" 0xa0]
- #list [regexp {(.*)$nbsp-$nbsp(.*)} $string dummy f1 f2] $f1 $f2
list [regexp "(.*)[set nbsp](.*)" $string dummy f1 f2] $f1 $f2
-} {}
+} {1 abc def}
diff --git a/tests/scan.test b/tests/scan.test
new file mode 100644
index 0000000..ce18581
--- /dev/null
+++ b/tests/scan.test
@@ -0,0 +1,667 @@
+source testing.tcl
+
+# Commands covered: scan
+#
+# This file contains a collection of tests for one or more of the Tcl
+# built-in commands. Sourcing this file into Tcl runs the tests and
+# generates output for errors. No output means no errors were found.
+#
+# Copyright (c) 1991-1994 The Regents of the University of California.
+# Copyright (c) 1994-1997 Sun Microsystems, Inc.
+# Copyright (c) 1998-1999 by Scriptics Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# RCS: @(#) $Id: scan.test,v 1.10.2.2 2002/02/07 01:54:04 hobbs Exp $
+
+test scan-1.1 {BuildCharSet, CharInSet} {
+ list [scan foo {%[^o]} x] $x
+} {1 f}
+test scan-1.2 {BuildCharSet, CharInSet} {
+ list [scan \]foo {%[]f]} x] $x
+} {1 {]f}}
+test scan-1.3 {BuildCharSet, CharInSet} {
+ list [scan abc-def {%[a-c]} x] $x
+} {1 abc}
+test scan-1.4 {BuildCharSet, CharInSet} {
+ list [scan abc-def {%[a-c]} x] $x
+} {1 abc}
+test scan-1.5 {BuildCharSet, CharInSet} {
+ list [scan -abc-def {%[-ac]} x] $x
+} {1 -a}
+test scan-1.6 {BuildCharSet, CharInSet} {
+ list [scan -abc-def {%[ac-]} x] $x
+} {1 -a}
+test scan-1.7 {BuildCharSet, CharInSet} {
+ list [scan abc-def {%[c-a]} x] $x
+} {1 abc}
+test scan-1.8 {BuildCharSet, CharInSet} {
+ list [scan def-abc {%[^c-a]} x] $x
+} {1 def-}
+test scan-1.9 {BuildCharSet, CharInSet no match} {
+ catch {unset x}
+ list [scan {= f} {= %[TF]} x] [info exists x]
+} {0 0}
+
+test scan-2.1 {ReleaseCharSet} {
+ list [scan abcde {%[abc]} x] $x
+} {1 abc}
+test scan-2.2 {ReleaseCharSet} {
+ list [scan abcde {%[a-c]} x] $x
+} {1 abc}
+
+test scan-3.1 {ValidateFormat} {
+ list [catch {scan {} {%d%1$d} x} msg] $msg
+} {1 {cannot mix "%" and "%n$" conversion specifiers}}
+test scan-3.2 {ValidateFormat} {
+ list [catch {scan {} {%d%1$d} x} msg] $msg
+} {1 {cannot mix "%" and "%n$" conversion specifiers}}
+test scan-3.3 {ValidateFormat} {
+ list [catch {scan {} {%2$d%d} x} msg] $msg
+} {1 {"%n$" argument index out of range}}
+test scan-3.4 {ValidateFormat} {
+ # degenerate case, before changed from 8.2 to 8.3
+ list [catch {scan {} %d} msg] $msg
+} {0 {}}
+test scan-3.5 {ValidateFormat} {
+ list [catch {scan {} {%10c} a} msg] $msg
+} {1 {field width may not be specified in %c conversion}}
+test scan-3.6 {ValidateFormat} {
+ list [catch {scan {} {%*1$d} a} msg] $msg
+} {1 {bad scan conversion character}}
+test scan-3.7 {ValidateFormat} {
+ list [catch {scan {} {%1$d%1$d} a} msg] $msg
+} {1 {variable is assigned by multiple "%n$" conversion specifiers}}
+test scan-3.8 {ValidateFormat} {
+ list [catch {scan {} a x} msg] $msg
+} {1 {variable is not assigned by any conversion specifiers}}
+test scan-3.9 {ValidateFormat} {
+ list [catch {scan {} {%2$s} x y} msg] $msg
+} {1 {variable is not assigned by any conversion specifiers}}
+test scan-3.10 {ValidateFormat} {
+ list [catch {scan {} {%[a} x} msg] $msg
+} {1 {unmatched [ in format string}}
+test scan-3.11 {ValidateFormat} {
+ list [catch {scan {} {%[^a} x} msg] $msg
+} {1 {unmatched [ in format string}}
+test scan-3.12 {ValidateFormat} {
+ list [catch {scan {} {%[]a} x} msg] $msg
+} {1 {unmatched [ in format string}}
+test scan-3.13 {ValidateFormat} {
+ list [catch {scan {} {%[^]a} x} msg] $msg
+} {1 {unmatched [ in format string}}
+
+test scan-4.1 {Tcl_ScanObjCmd, argument checks} {
+ list [catch {scan} msg] $msg
+} {1 {wrong # args: should be "scan string format ?varName varName ...?"}}
+test scan-4.2 {Tcl_ScanObjCmd, argument checks} {
+ list [catch {scan string} msg] $msg
+} {1 {wrong # args: should be "scan string format ?varName varName ...?"}}
+test scan-4.3 {Tcl_ScanObjCmd, argument checks} {
+ # degenerate case, before changed from 8.2 to 8.3
+ list [catch {scan string format} msg] $msg
+} {0 {}}
+test scan-4.4 {Tcl_ScanObjCmd, whitespace} {
+ list [scan { abc def } {%s%s} x y] $x $y
+} {2 abc def}
+test scan-4.5 {Tcl_ScanObjCmd, whitespace} {
+ list [scan { abc def } { %s %s } x y] $x $y
+} {2 abc def}
+test scan-4.6 {Tcl_ScanObjCmd, whitespace} {
+ list [scan { abc def } { %s %s } x y] $x $y
+} {2 abc def}
+test scan-4.7 {Tcl_ScanObjCmd, literals} {
+ # degenerate case, before changed from 8.2 to 8.3
+ scan { abc def } { abc def }
+} {}
+test scan-4.8 {Tcl_ScanObjCmd, literals} {
+ set x {}
+ list [scan { abcg} { abc def %1s} x] $x
+} {0 {}}
+test scan-4.9 {Tcl_ScanObjCmd, literals} {
+ list [scan { abc%defghi} { abc %% def%n } x] $x
+} {1 10}
+test scan-4.10 {Tcl_ScanObjCmd, assignment suppression} {
+ list [scan { abc def } { %*c%s def } x] $x
+} {1 bc}
+test scan-4.11 {Tcl_ScanObjCmd, XPG3-style} {
+ list [scan { abc def } {%2$s %1$s} x y] $x $y
+} {2 def abc}
+test scan-4.12 {Tcl_ScanObjCmd, width specifiers} {
+ list [scan {abc123456789012} {%3s%3d%3f%3[0-9]%s} a b c d e] $a $b $c $d $e
+} {5 abc 123 456.0 789 012}
+test scan-4.13 {Tcl_ScanObjCmd, width specifiers} {
+ list [scan {abc123456789012} {%3s%3d%3f%3[0-9]%s} a b c d e] $a $b $c $d $e
+} {5 abc 123 456.0 789 012}
+test scan-4.14 {Tcl_ScanObjCmd, underflow} {
+ set x {}
+ list [scan {a} {a%d} x] $x
+} {-1 {}}
+test scan-4.15 {Tcl_ScanObjCmd, underflow} {
+ set x {}
+ list [scan {} {a%d} x] $x
+} {-1 {}}
+test scan-4.16 {Tcl_ScanObjCmd, underflow} {
+ set x {}
+ list [scan {ab} {a%d} x] $x
+} {0 {}}
+test scan-4.17 {Tcl_ScanObjCmd, underflow} {
+ set x {}
+ list [scan {a } {a%d} x] $x
+} {-1 {}}
+test scan-4.18 {Tcl_ScanObjCmd, skipping whitespace} {
+ list [scan { b} {%c%s} x y] $x $y
+} {2 32 b}
+test scan-4.19 {Tcl_ScanObjCmd, skipping whitespace} {
+ list [scan { b} {%[^b]%s} x y] $x $y
+} {2 { } b}
+test scan-4.20 {Tcl_ScanObjCmd, string scanning} {
+ list [scan {abc def} {%s} x] $x
+} {1 abc}
+test scan-4.21 {Tcl_ScanObjCmd, string scanning} {
+ list [scan {abc def} {%0s} x] $x
+} {1 abc}
+test scan-4.22 {Tcl_ScanObjCmd, string scanning} {
+ list [scan {abc def} {%2s} x] $x
+} {1 ab}
+test scan-4.23 {Tcl_ScanObjCmd, string scanning} {
+ list [scan {abc def} {%*s%n} x] $x
+} {1 3}
+test scan-4.24 {Tcl_ScanObjCmd, charset scanning} {
+ list [scan {abcdef} {%[a-c]} x] $x
+} {1 abc}
+test scan-4.25 {Tcl_ScanObjCmd, charset scanning} {
+ list [scan {abcdef} {%0[a-c]} x] $x
+} {1 abc}
+test scan-4.26 {Tcl_ScanObjCmd, charset scanning} {
+ list [scan {abcdef} {%2[a-c]} x] $x
+} {1 ab}
+test scan-4.27 {Tcl_ScanObjCmd, charset scanning} {
+ list [scan {abcdef} {%*[a-c]%n} x] $x
+} {1 3}
+test scan-4.28 {Tcl_ScanObjCmd, character scanning} {
+ list [scan {abcdef} {%c} x] $x
+} {1 97}
+test scan-4.29 {Tcl_ScanObjCmd, character scanning} {
+ list [scan {abcdef} {%*c%n} x] $x
+} {1 1}
+
+test scan-4.30 {Tcl_ScanObjCmd, base-10 integer scanning} {
+ set x {}
+ list [scan {1234567890a} {%3d} x] $x
+} {1 123}
+test scan-4.31 {Tcl_ScanObjCmd, base-10 integer scanning} {
+ set x {}
+ list [scan {1234567890a} {%d} x] $x
+} {1 1234567890}
+test scan-4.32 {Tcl_ScanObjCmd, base-10 integer scanning} {
+ set x {}
+ list [scan {01234567890a} {%d} x] $x
+} {1 1234567890}
+test scan-4.33 {Tcl_ScanObjCmd, base-10 integer scanning} {
+ set x {}
+ list [scan {+01234} {%d} x] $x
+} {1 1234}
+test scan-4.34 {Tcl_ScanObjCmd, base-10 integer scanning} {
+ set x {}
+ list [scan {-01234} {%d} x] $x
+} {1 -1234}
+test scan-4.35 {Tcl_ScanObjCmd, base-10 integer scanning} {
+ set x {}
+ list [scan {a01234} {%d} x] $x
+} {0 {}}
+test scan-4.36 {Tcl_ScanObjCmd, base-10 integer scanning} {
+ set x {}
+ list [scan {0x10} {%d} x] $x
+} {1 0}
+test scan-4.37 {Tcl_ScanObjCmd, base-8 integer scanning} {
+ set x {}
+ list [scan {012345678} {%o} x] $x
+} {1 342391}
+test scan-4.38 {Tcl_ScanObjCmd, base-8 integer scanning} {
+ set x {}
+ list [scan {+1238 -1239 123a} {%o%*s%o%*s%o} x y z] $x $y $z
+} {3 83 -83 83}
+test scan-4.39 {Tcl_ScanObjCmd, base-16 integer scanning} {
+ set x {}
+ list [scan {+1238 -123a 0123} {%x%x%x} x y z] $x $y $z
+} {3 4664 -4666 291}
+test scan-4.40 {Tcl_ScanObjCmd, base-16 integer scanning} {
+ # The behavior changed in 8.4a4/8.3.4cvs (6 Feb) to correctly
+ # return '1' for 0x1 scanned via %x, to comply with 8.0 and C scanf.
+ # Bug #495213
+ set x {}
+ list [scan {aBcDeF AbCdEf 0x1} {%x%x%x} x y z] $x $y $z
+} {3 11259375 11259375 1}
+test scan-4.40.1 {Tcl_ScanObjCmd, base-16 integer scanning} {
+ set x {}
+ list [scan {0xF 0x00A0B 0X0XF} {%x %x %x} x y z] $x $y $z
+} {3 15 2571 0}
+test scan-4.40.2 {Tcl_ScanObjCmd, base-16 integer scanning} {
+ catch {unset x}
+ list [scan {xF} {%x} x] [info exists x]
+} {0 0}
+test scan-4.41 {Tcl_ScanObjCmd, base-unknown integer scanning} {
+ set x {}
+ list [scan {10 010 0x10} {%i%i%i} x y z] $x $y $z
+} {3 10 8 16}
+test scan-4.42 {Tcl_ScanObjCmd, base-unknown integer scanning} {
+ set x {}
+ list [scan {10 010 0X10} {%i%i%i} x y z] $x $y $z
+} {3 10 8 16}
+test scan-4.43 {Tcl_ScanObjCmd, integer scanning, odd cases} {
+ set x {}
+ list [scan {+ } {%i} x] $x
+} {0 {}}
+test scan-4.44 {Tcl_ScanObjCmd, integer scanning, odd cases} {
+ set x {}
+ list [scan {+} {%i} x] $x
+} {-1 {}}
+test scan-4.45 {Tcl_ScanObjCmd, integer scanning, odd cases} {
+ set x {}
+ list [scan {0x} {%i%s} x y] $x $y
+} {2 0 x}
+test scan-4.46 {Tcl_ScanObjCmd, integer scanning, odd cases} {
+ set x {}
+ list [scan {0X} {%i%s} x y] $x $y
+} {2 0 X}
+test scan-4.47 {Tcl_ScanObjCmd, integer scanning, suppressed} {
+ set x {}
+ list [scan {123def} {%*i%s} x] $x
+} {1 def}
+test scan-4.48 {Tcl_ScanObjCmd, float scanning} {
+ list [scan {1 2 3} {%e %f %g} x y z] $x $y $z
+} {3 1.0 2.0 3.0}
+test scan-4.49 {Tcl_ScanObjCmd, float scanning} {
+ list [scan {.1 0.2 3.} {%e %f %g} x y z] $x $y $z
+} {3 0.1 0.2 3.0}
+test scan-4.50 {Tcl_ScanObjCmd, float scanning} {
+ list [scan {1234567890a} %f x] $x
+} {1 1234567890.0}
+test scan-4.51 {Tcl_ScanObjCmd, float scanning} {
+ list [scan {+123+45} %f x] $x
+} {1 123.0}
+test scan-4.52 {Tcl_ScanObjCmd, float scanning} {
+ list [scan {-123+45} %f x] $x
+} {1 -123.0}
+test scan-4.53 {Tcl_ScanObjCmd, float scanning} {
+ list [scan {1.0e1} %f x] $x
+} {1 10.0}
+test scan-4.54 {Tcl_ScanObjCmd, float scanning} {
+ list [scan {1.0e-1} %f x] $x
+} {1 0.1}
+test scan-4.55 {Tcl_ScanObjCmd, odd cases} {
+ set x {}
+ list [scan {+} %f x] $x
+} {-1 {}}
+test scan-4.56 {Tcl_ScanObjCmd, odd cases} {
+ set x {}
+ list [scan {1.0e} %f%s x y] $x $y
+} {2 1.0 e}
+test scan-4.57 {Tcl_ScanObjCmd, odd cases} {
+ set x {}
+ list [scan {1.0e+} %f%s x y] $x $y
+} {2 1.0 e+}
+test scan-4.58 {Tcl_ScanObjCmd, odd cases} {
+ set x {}
+ set y {}
+ list [scan {e1} %f%s x y] $x $y
+} {0 {} {}}
+test scan-4.59 {Tcl_ScanObjCmd, float scanning} {
+ list [scan {1.0e-1x} %*f%n x] $x
+} {1 6}
+
+test scan-4.60 {Tcl_ScanObjCmd, set errors} {
+ set x {}
+ set y {}
+ catch {unset z}; array set z {}
+ set result [list [catch {scan {abc def ghi} {%s%s%s} x z y} msg] \
+ $msg $x $y]
+ unset z
+ set result
+} {1 {couldn't set variable "z"} abc ghi}
+test scan-4.61 {Tcl_ScanObjCmd, set errors} {
+ set x {}
+ catch {unset y}; array set y {}
+ catch {unset z}; array set z {}
+ set result [list [catch {scan {abc def ghi} {%s%s%s} x z y} msg] \
+ $msg $x]
+ unset y
+ unset z
+ set result
+} {1 {couldn't set variable "z"couldn't set variable "y"} abc}
+
+# procedure that returns the range of integers
+
+proc int_range {} {
+ for { set MIN_INT 1 } { $MIN_INT > 0 } {} {
+ set MIN_INT [expr { $MIN_INT << 1 }]
+ }
+ set MAX_INT [expr { ~ $MIN_INT }]
+ return [list $MIN_INT $MAX_INT]
+}
+
+test scan-4.62 {scanning of large and negative octal integers} {
+ foreach { MIN_INT MAX_INT } [int_range] {}
+ set scanstring [format {%o %o %o} -1 $MIN_INT $MAX_INT]
+ list [scan $scanstring {%o %o %o} a b c] \
+ [expr { $a == -1 }] [expr { $b == $MIN_INT }] [expr { $c == $MAX_INT }]
+} {3 1 1 1}
+test scan-4.63 {scanning of large and negative hex integers} {
+ foreach { MIN_INT MAX_INT } [int_range] {}
+ set scanstring [format {%x %x %x} -1 $MIN_INT $MAX_INT]
+ list [scan $scanstring {%x %x %x} a b c] \
+ [expr { $a == -1 }] [expr { $b == $MIN_INT }] [expr { $c == $MAX_INT }]
+} {3 1 1 1}
+
+# clean up from last two tests
+
+catch {
+ rename int_range {}
+}
+
+test scan-5.1 {integer scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "-20 1476 \n33 0" "%d %d %d %d" a b c d] $a $b $c $d
+} {4 -20 1476 33 0}
+test scan-5.2 {integer scanning} {
+ set a {}; set b {}; set c {}
+ list [scan "-45 16 7890 +10" "%2d %*d %10d %d" a b c] $a $b $c
+} {3 -4 16 7890}
+test scan-5.3 {integer scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "-45 16 +10 987" "%ld %d %ld %d" a b c d] $a $b $c $d
+} {4 -45 16 10 987}
+test scan-5.4 {integer scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "14 1ab 62 10" "%d %x %lo %x" a b c d] $a $b $c $d
+} {4 14 427 50 16}
+test scan-5.5 {integer scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "12345670 1234567890ab cdefg" "%o %o %x %lx" a b c d] \
+ $a $b $c $d
+} {4 2739128 342391 561323 52719}
+test scan-5.6 {integer scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "ab123-24642" "%2x %3x %3o %2o" a b c d] $a $b $c $d
+} {4 171 291 -20 52}
+test scan-5.7 {integer scanning} {
+ set a {}; set b {}
+ list [scan "1234567 234 567 " "%*3x %x %*o %4o" a b] $a $b
+} {2 17767 375}
+test scan-5.8 {integer scanning} {
+ set a {}; set b {}
+ list [scan "a 1234" "%d %d" a b] $a $b
+} {0 {} {}}
+test scan-5.9 {integer scanning} {
+ set a {}; set b {}; set c {}; set d {};
+ list [scan "12345678" "%2d %2d %2ld %2d" a b c d] $a $b $c $d
+} {4 12 34 56 78}
+test scan-5.10 {integer scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "1 2 " "%hd %d %d %d" a b c d] $a $b $c $d
+} {2 1 2 {} {}}
+#
+# The behavior for scaning intergers larger than MAX_INT is
+# not defined by the ANSI spec. Some implementations wrap the
+# input (-16) some return MAX_INT.
+#
+test scan-5.11 {integer scanning} {
+ set a {}; set b {};
+ list [scan "4294967280 4294967280" "%u %d" a b] $a \
+ [expr {$b == -16 || $b == 0x7fffffff || $b == $a}]
+} {2 4294967280 1}
+
+test scan-6.1 {floating-point scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "2.1 -3.0e8 .99962 a" "%f%g%e%f" a b c d] $a $b $c $d
+} {3 2.1 -300000000.0 0.99962 {}}
+test scan-6.2 {floating-point scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "-1.2345 +8.2 9" "%3e %3lf %f %f" a b c d] $a $b $c $d
+} {4 -1.0 234.0 5.0 8.2}
+test scan-6.3 {floating-point scanning} {
+ set a {}; set b {}; set c {}
+ list [scan "1e00004 332E-4 3e+4" "%Lf %*2e %f %f" a b c] $a $c
+} {3 10000.0 30000.0}
+#
+# Some libc implementations consider 3.e- bad input. The ANSI
+# spec states that digits must follow the - sign.
+#
+test scan-6.4 {floating-point scanning} {
+ set a {}; set b {}; set c {}
+ list [scan "1. 47.6 2.e2 3.e-" "%f %*f %f %f" a b c] $a $b $c
+} {3 1.0 200.0 3.0}
+test scan-6.5 {floating-point scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "4.6 99999.7 876.43e-1 118" "%f %f %f %e" a b c d] $a $b $c $d
+} {4 4.6 99999.7 87.643 118.0}
+test scan-6.6 {floating-point scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "1.2345 697.0e-3 124 .00005" "%f %e %f %e" a b c d] $a $b $c $d
+} {4 1.2345 0.697 124.0 5e-05}
+test scan-6.7 {floating-point scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "4.6abc" "%f %f %f %f" a b c d] $a $b $c $d
+} {1 4.6 {} {} {}}
+test scan-6.8 {floating-point scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "4.6 5.2" "%f %f %f %f" a b c d] $a $b $c $d
+} {2 4.6 5.2 {} {}}
+
+test scan-7.1 {string and character scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "abc defghijk dum " "%s %3s %20s %s" a b c d] $a $b $c $d
+} {4 abc def ghijk dum}
+test scan-7.2 {string and character scanning} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "a bcdef" "%c%c%1s %s" a b c d] $a $b $c $d
+} {4 97 32 b cdef}
+test scan-7.3 {string and character scanning} {
+ set a {}; set b {}; set c {}
+ list [scan "123456 test " "%*c%*s %s %s %s" a b c] $a $b $c
+} {1 test {} {}}
+test scan-7.4 {string and character scanning} {
+ set a {}; set b {}; set c {}; set d
+ list [scan "ababcd01234 f 123450" {%4[abcd] %4[abcd] %[^abcdef] %[^0]} a b c d] $a $b $c $d
+} {4 abab cd {01234 } {f 12345}}
+test scan-7.5 {string and character scanning} {
+ set a {}; set b {}; set c {}
+ list [scan "aaaaaabc aaabcdefg + + XYZQR" {%*4[a] %s %*4[a]%s%*4[ +]%c} a b c] $a $b $c
+} {3 aabc bcdefg 43}
+test scan-7.6 {string and character scanning, unicode} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "abc d\u00c7fghijk dum " "%s %3s %20s %s" a b c d] $a $b $c $d
+} "4 abc d\u00c7f ghijk dum"
+test scan-7.7 {string and character scanning, unicode} {
+ set a {}; set b {}
+ list [scan "ab\u00c7cdef" "ab%c%c" a b] $a $b
+} "2 199 99"
+test scan-7.8 {string and character scanning, unicode} {
+ set a {}; set b {}
+ list [scan "ab\ufeffdef" "%\[ab\ufeff\]" a] $a
+} "1 ab\ufeff"
+
+test scan-8.1 {error conditions} {
+ catch {scan a}
+} 1
+test scan-8.2 {error conditions} {
+ catch {scan a} msg
+ set msg
+} {wrong # args: should be "scan string format ?varName varName ...?"}
+test scan-8.3 {error conditions} {
+ list [catch {scan a %D x} msg] $msg
+} {1 {bad scan conversion character "D"}}
+test scan-8.4 {error conditions} {
+ list [catch {scan a %O x} msg] $msg
+} {1 {bad scan conversion character "O"}}
+test scan-8.5 {error conditions} {
+ list [catch {scan a %X x} msg] $msg
+} {1 {bad scan conversion character "X"}}
+test scan-8.6 {error conditions} {
+ list [catch {scan a %F x} msg] $msg
+} {1 {bad scan conversion character "F"}}
+test scan-8.7 {error conditions} {
+ list [catch {scan a %E x} msg] $msg
+} {1 {bad scan conversion character "E"}}
+test scan-8.8 {error conditions} {
+ list [catch {scan a "%d %d" a} msg] $msg
+} {1 {different numbers of variable names and field specifiers}}
+test scan-8.9 {error conditions} {
+ list [catch {scan a "%d %d" a b c} msg] $msg
+} {1 {variable is not assigned by any conversion specifiers}}
+test scan-8.10 {error conditions} {
+ set a {}; set b {}; set c {}; set d {}
+ list [expr {[scan " a" " a %d %d %d %d" a b c d] <= 0}] $a $b $c $d
+} {1 {} {} {} {}}
+test scan-8.11 {error conditions} {
+ set a {}; set b {}; set c {}; set d {}
+ list [scan "1 2" "%d %d %d %d" a b c d] $a $b $c $d
+} {2 1 2 {} {}}
+test scan-8.12 {error conditions} {
+ catch {unset a}
+ set a(0) 44
+ list [catch {scan 44 %d a} msg] $msg
+} {1 {couldn't set variable "a"}}
+test scan-8.13 {error conditions} {
+ catch {unset a}
+ set a(0) 44
+ list [catch {scan 44 %c a} msg] $msg
+} {1 {couldn't set variable "a"}}
+test scan-8.14 {error conditions} {
+ catch {unset a}
+ set a(0) 44
+ list [catch {scan 44 %s a} msg] $msg
+} {1 {couldn't set variable "a"}}
+test scan-8.15 {error conditions} {
+ catch {unset a}
+ set a(0) 44
+ list [catch {scan 44 %f a} msg] $msg
+} {1 {couldn't set variable "a"}}
+test scan-8.16 {error conditions} {
+ catch {unset a}
+ set a(0) 44
+ list [catch {scan 44 %f a} msg] $msg
+} {1 {couldn't set variable "a"}}
+catch {unset a}
+test scan-8.17 {error conditions} {
+ list [catch {scan 44 %2c a} msg] $msg
+} {1 {field width may not be specified in %c conversion}}
+test scan-8.18 {error conditions} {
+ list [catch {scan abc {%[} x} msg] $msg
+} {1 {unmatched [ in format string}}
+test scan-8.19 {error conditions} {
+ list [catch {scan abc {%[^a} x} msg] $msg
+} {1 {unmatched [ in format string}}
+test scan-8.20 {error conditions} {
+ list [catch {scan abc {%[^]a} x} msg] $msg
+} {1 {unmatched [ in format string}}
+test scan-8.21 {error conditions} {
+ list [catch {scan abc {%[]a} x} msg] $msg
+} {1 {unmatched [ in format string}}
+
+test scan-9.1 {lots of arguments} {
+ scan "10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200" "%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d" a1 a2 a3 a4 a5 a6 a7 a8 a9 a10 a11 a12 a13 a14 a15 a16 a17 a18 a19 a20
+} 20
+test scan-9.2 {lots of arguments} {
+ scan "10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200" "%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d" a1 a2 a3 a4 a5 a6 a7 a8 a9 a10 a11 a12 a13 a14 a15 a16 a17 a18 a19 a20
+ set a20
+} 200
+
+test scan-10.1 {miscellaneous tests} {
+ set a {}
+ list [scan ab16c ab%dc a] $a
+} {1 16}
+test scan-10.2 {miscellaneous tests} {
+ set a {}
+ list [scan ax16c ab%dc a] $a
+} {0 {}}
+test scan-10.3 {miscellaneous tests} {
+ set a {}
+ list [catch {scan ab%c114 ab%%c%d a} msg] $msg $a
+} {0 1 114}
+test scan-10.4 {miscellaneous tests} {
+ set a {}
+ list [catch {scan ab%c14 ab%%c%d a} msg] $msg $a
+} {0 1 14}
+test scan-10.5 {miscellaneous tests} {
+ catch {unset arr}
+ set arr(2) {}
+ list [catch {scan ab%c14 ab%%c%d arr(2)} msg] $msg $arr(2)
+} {0 1 14}
+
+test scan-11.1 {alignment in results array (TCL_ALIGN)} {
+ scan "123 13.6" "%s %f" a b
+ set b
+} 13.6
+test scan-11.2 {alignment in results array (TCL_ALIGN)} {
+ scan "1234567 13.6" "%s %f" a b
+ set b
+} 13.6
+test scan-11.3 {alignment in results array (TCL_ALIGN)} {
+ scan "12345678901 13.6" "%s %f" a b
+ set b
+} 13.6
+test scan-11.4 {alignment in results array (TCL_ALIGN)} {
+ scan "123456789012345 13.6" "%s %f" a b
+ set b
+} 13.6
+test scan-11.5 {alignment in results array (TCL_ALIGN)} {
+ scan "1234567890123456789 13.6" "%s %f" a b
+ set b
+} 13.6
+
+test scan-12.1 {Tcl_ScanObjCmd, inline case} {
+ scan a %c
+} 97
+test scan-12.2 {Tcl_ScanObjCmd, inline case} {
+ scan abc %c%c%c%c
+} {97 98 99 {}}
+test scan-12.3 {Tcl_ScanObjCmd, inline case} {
+ scan abc %s%c
+} {abc {}}
+test scan-12.4 {Tcl_ScanObjCmd, inline case, underflow} {
+ scan abc abc%c
+} {}
+test scan-12.5 {Tcl_ScanObjCmd, inline case} {
+ scan abc bogus%c%c%c
+} {{} {} {}}
+test scan-12.6 {Tcl_ScanObjCmd, inline case} {
+ # degenerate case, behavior changed from 8.2 to 8.3
+ list [catch {scan foo foobar} msg] $msg
+} {0 {}}
+test scan-12.7 {Tcl_ScanObjCmd, inline case lots of arguments} {
+ scan "10 20 30 40 50 60 70 80 90 100 110 120 130 140\
+ 150 160 170 180 190 200" \
+ "%d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d %d"
+} {10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 {}}
+
+test scan-13.1 {Tcl_ScanObjCmd, inline XPG case} {
+ scan a {%1$c}
+} 97
+test scan-13.2 {Tcl_ScanObjCmd, inline XPG case} {
+ scan abc {%1$c%2$c%3$c%4$c}
+} {97 98 99 {}}
+test scan-13.3 {Tcl_ScanObjCmd, inline XPG case} {
+ list [catch {scan abc {%1$c%1$c}} msg] $msg
+} {1 {variable is assigned by multiple "%n$" conversion specifiers}}
+test scan-13.4 {Tcl_ScanObjCmd, inline XPG case} {
+ scan abc {%2$s%1$c}
+} {{} abc}
+test scan-13.5 {Tcl_ScanObjCmd, inline XPG case, underflow} {
+ scan abc {abc%5$c}
+} {}
+test scan-13.6 {Tcl_ScanObjCmd, inline XPG case} {
+ catch {scan abc {bogus%1$c%5$c%10$c}} msg
+ list [llength $msg] $msg
+} {10 {{} {} {} {} {} {} {} {} {} {}}}
+test scan-13.7 {Tcl_ScanObjCmd, inline XPG case lots of arguments} {
+ scan "10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200" {%20$d %18$d %17$d %16$d %15$d %14$d %13$d %12$d %11$d %10$d %9$d %8$d %7$d %6$d %5$d %4$d %3$d %2$d %1$d}
+} {190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 {} 10}
+test scan-13.8 {Tcl_ScanObjCmd, inline XPG case lots of arguments} {
+ set msg [scan "10 20 30" {%100$d %5$d %200$d}]
+ list [llength $msg] [lindex $msg 99] [lindex $msg 4] [lindex $msg 199]
+} {200 10 20 30}
+
+testreport
diff --git a/tests/stacktrace.test b/tests/stacktrace.test
index 328dd49..7d94ccc 100644
--- a/tests/stacktrace.test
+++ b/tests/stacktrace.test
@@ -87,21 +87,21 @@ set expected {
err-5.3 {1 {can't read "bogus": no such variable} {{} errors.tcl 18 error_generator errors.tcl 50 error_caller stacktrace.test 17}}
err-5.4 {1 {can't read "bogus": no such variable} {{} errors.tcl 18 error_generator errors.tcl 53 error_caller stacktrace.test 17}}
err-6.1 {1 {from dummyproc
-Can't find package 'dummy'} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 21 error_generator errors.tcl 44 error_caller stacktrace.test 17}}
+Can't load package 'dummy'} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 21 error_generator errors.tcl 44 error_caller stacktrace.test 17}}
err-6.2 {1 {from dummyproc
-Can't find package 'dummy'} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 21 error_generator errors.tcl 47 error_caller stacktrace.test 17}}
+Can't load package 'dummy'} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 21 error_generator errors.tcl 47 error_caller stacktrace.test 17}}
err-6.3 {1 {from dummyproc
-Can't find package 'dummy'} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 21 error_generator errors.tcl 50 error_caller stacktrace.test 17}}
+Can't load package 'dummy'} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 21 error_generator errors.tcl 50 error_caller stacktrace.test 17}}
err-6.4 {1 {from dummyproc
-Can't find package 'dummy'} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 21 error_generator errors.tcl 53 error_caller stacktrace.test 17}}
+Can't load package 'dummy'} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 21 error_generator errors.tcl 53 error_caller stacktrace.test 17}}
err-7.1 {1 {from dummyproc} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 24 error_generator errors.tcl 44 error_caller stacktrace.test 17}}
err-7.2 {1 {from dummyproc} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 24 error_generator errors.tcl 47 error_caller stacktrace.test 17}}
err-7.3 {1 {from dummyproc} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 24 error_generator errors.tcl 50 error_caller stacktrace.test 17}}
err-7.4 {1 {from dummyproc} {{} dummy.tcl 3 dummyproc dummy.tcl 6 {} errors.tcl 24 error_generator errors.tcl 53 error_caller stacktrace.test 17}}
- err-8.1 {1 {Can't find package 'bogus'} {{} errors.tcl 27 error_generator errors.tcl 44 error_caller stacktrace.test 17}}
- err-8.2 {1 {Can't find package 'bogus'} {{} errors.tcl 27 error_generator errors.tcl 47 error_caller stacktrace.test 17}}
- err-8.3 {1 {Can't find package 'bogus'} {{} errors.tcl 27 error_generator errors.tcl 50 error_caller stacktrace.test 17}}
- err-8.4 {1 {Can't find package 'bogus'} {{} errors.tcl 27 error_generator errors.tcl 53 error_caller stacktrace.test 17}}
+ err-8.1 {1 {Can't load package 'bogus'} {{} errors.tcl 27 error_generator errors.tcl 44 error_caller stacktrace.test 17}}
+ err-8.2 {1 {Can't load package 'bogus'} {{} errors.tcl 27 error_generator errors.tcl 47 error_caller stacktrace.test 17}}
+ err-8.3 {1 {Can't load package 'bogus'} {{} errors.tcl 27 error_generator errors.tcl 50 error_caller stacktrace.test 17}}
+ err-8.4 {1 {Can't load package 'bogus'} {{} errors.tcl 27 error_generator errors.tcl 53 error_caller stacktrace.test 17}}
}
main
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-01 23:24:50 +0000