diff options
Diffstat (limited to 'radsecproxy.conf-example')
| -rw-r--r-- | radsecproxy.conf-example | 191 |
1 files changed, 0 insertions, 191 deletions
diff --git a/radsecproxy.conf-example b/radsecproxy.conf-example deleted file mode 100644 index 6d24ba8..0000000 --- a/radsecproxy.conf-example +++ /dev/null @@ -1,191 +0,0 @@ -# Master config file, must be in /etc/radsecproxy or specified with -c option -# All possible config options are listed below - -# First you may define any global options, these are: -# -# You can optionally specify addresses and ports to listen on -# Multiple statements can be used for multiple ports/addresses -#ListenUDP *:1814 -#listenUDP localhost -#ListenTCP [2001:700:1:7:215:f2ff:fe35:307d]:1812 -#listenTLS 10.10.10.10:2084 -#ListenTLS [2001:700:1:7:215:f2ff:fe35:307d]:2084 -#ListenDTLS [2001:700:1:7:215:f2ff:fe35:307d]:2084 - -# To specify a certain address/port for UDP/TLS requests you can use e.g. -#SourceUDP 127.0.0.1:33000 -#SourceTCP *:33000 -#SourceTLS *:33001 -#SourceDTLS *:33001 -# Optional log level. 3 is default, 1 is less, 5 is more -#LogLevel 3 -# Optional LogDestination, else stderr used for logging -# Logging to file -#LogDestination file:///tmp/rp.log -# Or logging with Syslog. LOG_DAEMON used if facility not specified -# The supported facilities are LOG_DAEMON, LOG_MAIL, LOG_USER and -# LOG_LOCAL0, ..., LOG_LOCAL7 -#LogDestination x-syslog:/// -#LogDestination x-syslog:///log_local2 - -# There is an option for doing some simple loop prevention. Note that -# the LoopPrevention directive can be used in server blocks too, -# overriding what's set here in the basic settings. -#LoopPrevention on -# Add TTL attribute with value 20 if not present (prevents endless loops) -#addTTL 20 - -# If we have TLS clients or servers we must define at least one tls block. -# You can name them whatever you like and then reference them by name when -# specifying clients or servers later. There are however three special names -# "default", "defaultclient" and "defaultserver". If no name is defined for -# a client, the "defaultclient" block will be used if it exists, if not the -# "default" will be used. For a server, "defaultserver" followed by "default" -# will be checked. -# -# The simplest configuration you can do is: -tls default { - # You must specify at least one of CACertificateFile or CACertificatePath - # for TLS to work. We always verify peer certificate (client and server) - # CACertificateFile /etc/cacerts/CA.pem - CACertificatePath /etc/cacerts - - # You must specify the below for TLS, we always present our certificate - CertificateFile /etc/hostcertkey/host.example.com.pem - CertificateKeyFile /etc/hostcertkey/host.example.com.key.pem - # Optionally specify password if key is encrypted (not very secure) - CertificateKeyPassword "follow the white rabbit" - # Optionally enable CRL checking - # CRLCheck on - # Optionally specify how long CAs and CRLs are cached, default forever - # CacheExpiry 3600 - # Optionally require that peer certs have one of the specified policyOIDs - # policyoid 1.2.3 # this option can be used multiple times - # policyoid 1.3.4 -} - -# If you want one cert for all clients and another for all servers, use -# defaultclient and defaultserver instead of default. If we wanted some -# particular server to use something else you could specify a block -# "tls myserver" and then reference that for that server. If you always -# name the tls block in the client/server config you don't need a default - -# Now we configure clients, servers and realms. Note that these and -# also the lines above may be in any order, except that a realm -# can only be configured to use a server that is previously configured. - -# A realm can be a literal domain name, * which matches all, or a -# regexp. A regexp is specified by the character prefix / -# For regexp we do case insensitive matching of the entire username string. -# The matching of realms is done in the order they are specified, using the -# first match found. Some examples are -# "@example\.com$", "\.com$", ".*" and "^[a-z].*@example\.com$". -# To treat local users separately you might try first specifying "@" -# and after that "*". - -# Configure a rewrite block if you want to add/remove/modify attributes -# rewrite example { -# # Remove NAS-Port. -# removeAttribute 5 -# # Remove vendor attribute 100. -# removeVendorAttribute 99:100 -# # Called-Station-Id = "123456" -# addAttribute 30:123456 -# # Vendor-99-Attr-101 = 0x0f -# addVendorAttribute 99:101:%0f -# # Change users @local to @example.com. -# modifyAttribute 1:/^(.*)@local$/\1@example.com/ -# } - -client 2001:db8::1 { - type tls - secret verysecret -# we could specify tls here, e.g. -# tls myclient -# in order to use tls parameters named myclient. We don't, so we will -# use "tls defaultclient" if defined, or look for "tls default" as a -# last resort -} -client 127.0.0.1 { - type udp - secret secret -# Might do rewriting of incoming messages using rewrite block example -# rewriteIn example -# Can also do rewriting of outgoing messages -# rewriteOut example -} -client 127.0.0.1 { - type tcp - secret secret -} -client radius.example.com { - type tls -# secret is optional for TLS -} -client radius.example.com { - type dtls -# secret is optional for DTLS -} - -server 127.0.0.1 { - type UDP - secret secret -# Might do rewriting of incoming messages using rewrite block example -# rewriteIn example -# Can also do rewriting of outgoing messages -# rewriteOut example -# Might override loop prevention here too: -# LoopPrevention off -} -realm eduroam.cc { - server 127.0.0.1 -# If also want to use this server for accounting, specify -# accountingServer 127.0.0.1 -} - -server 2001:db8::1 { - type TLS - port 2283 -# secret is optional for TLS -# we could specify tls here, e.g. -# tls myserver -# in order to use tls parameters named myserver. We don't, so we will -# use "tls defaultserver" if defined, or look for "tls default" as a -# last resort -} -server radius.example.com { - type tls - secret verysecret - StatusServer on -# statusserver is optional, can be on or off. Off is default -} -#server radius.example.com { -# type dtls -# secret verysecret -# StatusServer on -## statusserver is optional, can be on or off. Off is default -#} - -# Equivalent to example.com -realm /@example\.com$ { - server 2001:db8::1 -} -# One can define a realm without servers, the proxy will then reject -# and requests matching this. Optionally one can specify ReplyMessage -# attribute to be included in the reject message. One can also use -# AccountingResponse option to specify that the proxy should send such. -realm /\.com$ { -} -realm /^anonymous$ { - replymessage "No Access" -# AccountingResponse On -} -# The realm below is equivalent to /.* -realm * { - server radius.example.com -} -# If you don't have a default server you probably want to -# reject all unknowns. Optionally you can also include a message -#realm * { -# replymessage "User unknown" -#} |