diff options
Diffstat (limited to 'docs/admin/installation-nginx.rst')
| -rw-r--r-- | docs/admin/installation-nginx.rst | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/docs/admin/installation-nginx.rst b/docs/admin/installation-nginx.rst new file mode 100644 index 0000000..97966c8 --- /dev/null +++ b/docs/admin/installation-nginx.rst @@ -0,0 +1,383 @@ +.. _installation nginx: + +================== +Install with nginx +================== + +.. _nginx: + https://docs.nginx.com/nginx/admin-guide/ +.. _nginx server configuration: + https://docs.nginx.com/nginx/admin-guide/web-server/web-server/#setting-up-virtual-servers +.. _nginx beginners guide: + https://nginx.org/en/docs/beginners_guide.html +.. _Getting Started wiki: + https://www.nginx.com/resources/wiki/start/ +.. _uWSGI support from nginx: + https://uwsgi-docs.readthedocs.io/en/latest/Nginx.html +.. _uwsgi_params: + https://uwsgi-docs.readthedocs.io/en/latest/Nginx.html#configuring-nginx +.. _SCRIPT_NAME: + https://werkzeug.palletsprojects.com/en/1.0.x/wsgi/#werkzeug.wsgi.get_script_name + +.. sidebar:: further reading + + - nginx_ + - `nginx beginners guide`_ + - `nginx server configuration`_ + - `Getting Started wiki`_ + - `uWSGI support from nginx`_ + +.. contents:: Contents + :depth: 2 + :local: + :backlinks: entry + +---- + +**Install** :ref:`nginx searx site` using :ref:`filtron.sh <filtron.sh overview>` + +.. code:: bash + + $ sudo -H ./utils/filtron.sh nginx install + +**Install** :ref:`nginx searx site` using :ref:`morty.sh <morty.sh overview>` + +.. code:: bash + + $ sudo -H ./utils/morty.sh nginx install + +---- + + +The nginx HTTP server +===================== + +If nginx_ is not installed (uwsgi will not work with the package nginx-light), +install it now. + +.. tabs:: + + .. group-tab:: Ubuntu / debian + + .. code:: sh + + sudo -H apt-get install nginx + + .. group-tab:: Arch Linux + + .. code-block:: sh + + sudo -H pacman -S nginx-mainline + sudo -H systemctl enable nginx + sudo -H systemctl start nginx + + .. group-tab:: Fedora / RHEL + + .. code-block:: sh + + sudo -H dnf install nginx + sudo -H systemctl enable nginx + sudo -H systemctl start nginx + +Now at http://localhost you should see a *Welcome to nginx!* page, on Fedora you +see a *Fedora Webserver - Test Page*. The test page comes from the default +`nginx server configuration`_. How this default intro site is configured, +depends on the linux distribution: + +.. tabs:: + + .. group-tab:: Ubuntu / debian + + .. code:: sh + + less /etc/nginx/nginx.conf + + there is a line including site configurations from: + + .. code:: nginx + + include /etc/nginx/sites-enabled/*; + + .. group-tab:: Arch Linux + + .. code-block:: sh + + less /etc/nginx/nginx.conf + + in there is a configuration section named ``server``: + + .. code-block:: nginx + + server { + listen 80; + server_name localhost; + # ... + } + + .. group-tab:: Fedora / RHEL + + .. code-block:: sh + + less /etc/nginx/nginx.conf + + there is a line including site configurations from: + + .. code:: nginx + + include /etc/nginx/conf.d/*.conf; + +.. _nginx searx site: + +A nginx searx site +================== + +.. sidebar:: public to the internet? + + If your searx instance is public, stop here and first install :ref:`filtron + reverse proxy <filtron.sh>` and :ref:`result proxy morty <morty.sh>`, see + :ref:`installation scripts`. If already done, follow setup: *searx via + filtron plus morty*. + +Now you have to create a configuration for the searx site. If nginx_ is new to +you, the `nginx beginners guide`_ is a good starting point and the `Getting +Started wiki`_ is always a good resource *to keep in the pocket*. + +.. tabs:: + + .. group-tab:: Ubuntu / debian + + Create configuration at ``/etc/nginx/sites-available/searx`` and place a + symlink to sites-enabled: + + .. code:: sh + + sudo -H ln -s /etc/nginx/sites-available/searx /etc/nginx/sites-enabled/searx + + .. group-tab:: Arch Linux + + In the ``/etc/nginx/nginx.conf`` file, replace the configuration section + named ``server``. + + .. group-tab:: Fedora / RHEL + + Create configuration at ``/etc/nginx/conf.d/searx`` and place a + symlink to sites-enabled: + +.. _nginx searx via filtron plus morty: + +.. tabs:: + + .. group-tab:: searx via filtron plus morty + + Use this setup, if your instance is public to the internet, compare + figure: :ref:`architecture <arch public>` and :ref:`installation scripts`. + + 1. Configure a reverse proxy for :ref:`filtron <filtron.sh>`, listening on + *localhost 4004* (:ref:`filtron route request`): + + .. code:: nginx + + # https://example.org/searx + + location /searx { + proxy_pass http://127.0.0.1:4004/; + + proxy_set_header Host $host; + proxy_set_header Connection $http_connection; + proxy_set_header X-Real-IP $remote_addr; + proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; + proxy_set_header X-Scheme $scheme; + proxy_set_header X-Script-Name /searx; + } + + location /searx/static/ { + alias /usr/local/searx/searx-src/searx/static/; + } + + + 2. Configure reverse proxy for :ref:`morty <searx morty>`, listening on + *localhost 3000*: + + .. code:: nginx + + # https://example.org/morty + + location /morty { + proxy_pass http://127.0.0.1:3000/; + + proxy_set_header Host $host; + proxy_set_header Connection $http_connection; + proxy_set_header X-Real-IP $remote_addr; + proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; + proxy_set_header X-Scheme $scheme; + } + + For a fully result proxification add :ref:`morty's <searx morty>` **public + URL** to your :origin:`searx/settings.yml`: + + .. code:: yaml + + result_proxy: + # replace example.org with your server's public name + url : https://example.org/morty + key : !!binary "insert_your_morty_proxy_key_here" + + server: + image_proxy : True + + + .. group-tab:: proxy or uWSGI + + Be warned, with this setup, your instance isn't :ref:`protected <searx + filtron>`. Nevertheless it is good enough for intranet usage and it is a + excellent example of; *how different services can be set up*. The next + example shows a reverse proxy configuration wrapping the :ref:`searx-uWSGI + application <uwsgi configuration>`, listening on ``http = + 127.0.0.1:8888``. + + .. code:: nginx + + # https://hostname.local/ + + location / { + proxy_pass http://127.0.0.1:8888; + + proxy_set_header Host $host; + proxy_set_header Connection $http_connection; + proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; + proxy_set_header X-Scheme $scheme; + proxy_buffering off; + } + + Alternatively you can use the `uWSGI support from nginx`_ via unix + sockets. For socket communication, you have to activate ``socket = + /run/uwsgi/app/searx/socket`` and comment out the ``http = + 127.0.0.1:8888`` configuration in your :ref:`uwsgi ini file <uwsgi + configuration>`. + + The example shows a nginx virtual ``server`` configuration, listening on + port 80 (IPv4 and IPv6 http://[::]:80). The uWSGI app is configured at + location ``/`` by importing the `uwsgi_params`_ and passing requests to + the uWSGI socket (``uwsgi_pass``). The ``server``\'s root points to the + :ref:`searx-src clone <searx-src>` and wraps directly the + :origin:`searx/static/` content at ``location /static``. + + .. code:: nginx + + server { + # replace hostname.local with your server's name + server_name hostname.local; + + listen 80; + listen [::]:80; + + location / { + include uwsgi_params; + uwsgi_pass unix:/run/uwsgi/app/searx/socket; + } + + root /usr/local/searx/searx-src/searx; + location /static { } + } + + If not already exists, create a folder for the unix sockets, which can be + used by the searx account: + + .. code:: bash + + mkdir -p /run/uwsgi/app/searx/ + sudo -H chown -R searx:searx /run/uwsgi/app/searx/ + + .. group-tab:: \.\. at subdir URL + + Be warned, with these setups, your instance isn't :ref:`protected <searx + filtron>`. The examples are just here to demonstrate how to export the + searx application from a subdirectory URL ``https://example.org/searx/``. + + .. code:: nginx + + # https://hostname.local/searx + + location /searx { + proxy_pass http://127.0.0.1:8888; + + proxy_set_header Host $host; + proxy_set_header Connection $http_connection; + proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; + proxy_set_header X-Scheme $scheme; + proxy_set_header X-Script-Name /searx; + proxy_buffering off; + } + + location /searx/static/ { + alias /usr/local/searx/searx-src/searx/static/; + } + + The ``X-Script-Name /searx`` is needed by the searx implementation to + calculate relative URLs correct. The next example shows a uWSGI + configuration. Since there are no HTTP headers in a (u)WSGI protocol, the + value is shipped via the SCRIPT_NAME_ in the WSGI environment. + + .. code:: nginx + + # https://hostname.local/searx + + location /searx { + uwsgi_param SCRIPT_NAME /searx; + include uwsgi_params; + uwsgi_pass unix:/run/uwsgi/app/searx/socket; + } + + location /searx/static/ { + alias /usr/local/searx/searx-src/searx/; + } + + For searx to work correctly the ``base_url`` must be set in the + :origin:`searx/settings.yml`. + + .. code:: yaml + + server: + # replace example.org with your server's public name + base_url : https://example.org/searx/ + + +Restart service: + +.. tabs:: + + .. group-tab:: Ubuntu / debian + + .. code:: sh + + sudo -H systemctl restart nginx + sudo -H service uwsgi restart searx + + .. group-tab:: Arch Linux + + .. code:: sh + + sudo -H systemctl restart nginx + sudo -H systemctl restart uwsgi@searx + + .. group-tab:: Fedora + + .. code:: sh + + sudo -H systemctl restart nginx + sudo -H touch /etc/uwsgi.d/searx.ini + + +Disable logs +============ + +For better privacy you can disable nginx logs in ``/etc/nginx/nginx.conf``. + +.. code:: nginx + + http { + # ... + access_log /dev/null; + error_log /dev/null; + # ... + } |