diff options
author | Fabrice Carrega <fabrice.carrega@treize37.com> | 2016-02-01 22:43:47 +0100 |
---|---|---|
committer | Fabrice Carrega <fabrice.carrega@treize37.com> | 2016-02-01 22:43:47 +0100 |
commit | 1892be5aebc5dfdd2f251d01e1c41c11118b3c1f (patch) | |
tree | 85bba2069fd0205a0e743185c7c9196158626a48 /TROUBLESHOOTING.md | |
parent | 9f62ec1ab0cff77c06e5c42edbc1d94a4ce1245b (diff) |
Edited Troubleshooting.md #214
Diffstat (limited to 'TROUBLESHOOTING.md')
-rw-r--r-- | TROUBLESHOOTING.md | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/TROUBLESHOOTING.md b/TROUBLESHOOTING.md index be5d232..aabf657 100644 --- a/TROUBLESHOOTING.md +++ b/TROUBLESHOOTING.md @@ -3,3 +3,39 @@ Troubleshooting The installation and setup of Shairport Sync is straightforward on recent Linux distributions. Issues can occasionally arise caused by problems elsewhere in the system, typically WiFi reception and/or the WiFi adapter settings, the network, the router, firewall settings. In this brief document will be listed some problems and some solutions. + +### UFW firewall blocking connections on Raspbian (Raspberry Pi) + +**Problem** + +You have installed Shairport-sync successfully, the deamon is running, you can see it from your remote terminal but you are unable to play a song. + +**Before you change anything to your configuration** + +- Type the following command: + + `sudo ufw disable` + +- Try to launch a song from your remote device on the Shairport-sync one, if this works, proceed to the next step and follow the ones described below, in the solution section. + +- Enable UFW through the following command: + + `sudo ufw enable` + +**Solution** + +You have to allow connections to your Pi from remote devices. To do so, after re-enabling UFW (see last stp of the previous section), enter the following commands in shell: + +``` +sudo ufw allow from 192.168.1.1/16 to any port 3689 proto tcp +sudo ufw allow from 192.168.1.1/16 to any port 5353 +sudo ufw allow from 192.168.1.1/16 to any port 5000:5005 proto tcp +sudo ufw allow from 192.168.1.1/16 to any port 6000:6005 proto udp +sudo ufw allow from 192.168.1.1/16 to any port 35000:65535 proto udp +``` + +You may have to change the IP adresses range depending on your own local network settings. + +You can check UFW config by typing `sudo ufw status` in shell. Please make sure that UFW is active, especially if you have deactivated it previously for testing purpose. + +Run your song from your remote device. Enjoy ! |