diff options
Diffstat (limited to 'bindings/swig/Makefile.swig')
| -rw-r--r-- | bindings/swig/Makefile.swig | 578 |
1 files changed, 0 insertions, 578 deletions
diff --git a/bindings/swig/Makefile.swig b/bindings/swig/Makefile.swig deleted file mode 100644 index 9b8271a..0000000 --- a/bindings/swig/Makefile.swig +++ /dev/null @@ -1,578 +0,0 @@ -# Generated automatically from Makefile.in by configure. -# ------------------------------------------------------------ -# SWIG Examples Makefile -# -# This file is used by the examples to build modules. Assuming -# you ran configure, this file will probably work. However, -# it's not perfect so you might need to do some hand tweaking. -# -# Other notes: -# -# 1. Take a look at the prefixes below. Since SWIG works with -# multiple target languages, you may need to find out where -# certain packages have been installed. Set the prefixes -# accordingly. -# -# 2. To use this makefile, simply set SRCS, INTERFACE, INCLUDE, LIBS, -# TARGET, and do a -# $(MAKE) -f Makefile.template.in SRCS='$(SRCS)' \ -# INCLUDE='$(INCLUDE) LIBS='$(LIBS)' INTERFACE='$(INTERFACE)' \ -# TARGET='$(TARGET)' method -# -# 'method' describes what is being built. -#--------------------------------------------------------------- - -TARGET = -CC = gcc -CXX = c++ -CFLAGS = -prefix = /usr/local -exec_prefix= ${prefix} -SRCS = -INCLUDE = -LIBS = -INTERFACE = -SWIGOPT = -SWIG = swig -RUNTIMEDIR = $(exec_prefix)/lib - -LIBM = -lieee -lm -LIBC = -LIBCRYPT = -lcrypt -SYSLIBS = $(LIBM) $(LIBC) $(LIBCRYPT) - -libtool_comp = $(TOP)/../Tools/libtool --mode compile -libtool_link = $(TOP)/../Tools/libtool --mode link - -# X11 options - -XLIB = -L/usr/X11R6/lib -lX11 -XINCLUDE = -I/usr/X11R6/include - -IWRAP = $(INTERFACE:.i=_wrap.i) -ISRCS = $(IWRAP:.i=.c) -ICXXSRCS = $(IWRAP:.i=.cxx) -IOBJS = $(IWRAP:.i=.o) - -################################################################## -# Dynamic loading for C++ -# If you are going to be building dynamic loadable modules in C++, -# you may need to edit this line appropriately. -# -# This line works for g++, but I'm not sure what it might be -# for other C++ compilers -################################################################## - -CPP_DLLIBS = #-L/usr/local/lib/gcc-lib/sparc-sun-solaris2.5.1/2.7.2 \ - -L/usr/local/lib -lg++ -lstdc++ -lgcc - -# Solaris workshop 5.0 -# CPP_DLLIBS = -L/opt/SUNWspro/lib -lCrun - -# Symbols used for using shared libraries -SO= .so -LDSHARED= gcc -shared -CCSHARED= -fpic -CXXSHARED= gcc -shared - -# This is used for building shared libraries with a number of C++ -# compilers. If it doesn't work, comment it out. -CXXSHARED= c++ -shared - -OBJS = $(SRCS:.c=.o) $(CXXSRCS:.cxx=.o) - -################################################################## -##### Tcl/Tk ###### -################################################################## - -# Set these to your local copy of Tcl/Tk. - -TCL_INCLUDE = -TCL_LIB = -TCL_OPTS = -ldl -TK_OPTS = -ltk -ltcl -ldl - -# Extra Tcl specific dynamic linking options -TCL_DLNK = - -# ----------------------------------------------------------- -# Build a new version of the tclsh shell -# ----------------------------------------------------------- - - -tclsh: $(SRCS) - $(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) -ltclsh.i $(INTERFACE) - $(CC) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(TCL_INCLUDE) \ - $(TCL_LIB) $(TCL_OPTS) $(LIBS) $(SYSLIBS) -o $(TARGET) - -tclsh_cpp: $(SRCS) - $(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) -ltclsh.i $(INTERFACE) - $(CXX) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(TCL_INCLUDE) \ - $(TCL_LIB) $(TCL_OPTS) $(LIBS) $(SYSLIBS) -o $(TARGET) - -# ----------------------------------------------------------- -# Build a new copy of wish -# ----------------------------------------------------------- - -wish: $(SRCS) - $(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) -lwish.i $(INTERFACE) - $(CC) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(TCL_INCLUDE) \ - $(XINCLUDE) $(TCL_LIB) $(TK_OPTS) $(XLIB) $(LIBS) $(SYSLIBS) -o $(TARGET) - - -wish_cpp: $(SRCS) - $(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) -lwish.i $(INTERFACE) - $(CXX) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(TCL_INCLUDE) \ - $(XINCLUDE) $(TCL_LIB) $(TK_OPTS) $(XLIB) $(LIBS) $(SYSLIBS) -o $(TARGET) - -# ----------------------------------------------------------- -# Build a Tcl dynamic loadable module (you might need to tweak this) -# ----------------------------------------------------------- - -tcl: $(SRCS) - $(SWIG) -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(TCL_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(TCL_DLNK) $(LIBS) -o $(TARGET)$(SO) - -# ----------------------------------------------------------- -# Build a Tcl7.5 dynamic loadable module for C++ -# ----------------------------------------------------------- - -tcl_cpp: $(SRCS) - $(SWIG) -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(TCL_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(TCL_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO) - -# ----------------------------------------------------------- -# Build a Tcl7.5 dynamic loadable module, linked against SWIG runtime lib -# ----------------------------------------------------------- - -TCL_RUNTIME=-L$(RUNTIMEDIR) -lswigtcl8 - -tcl_multi: $(SRCS) - $(SWIG) -c -tcl8 $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(TCL_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(TCL_RUNTIME) $(TCL_DLNK) $(LIBS) -o $(TARGET)$(SO) - -tcl_multi_cpp: $(SRCS) - $(SWIG) -c -tcl8 -c++ $(SWIGOPT) $(TCL_SWIGOPTS) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(TCL_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(TCL_RUNTIME) $(TCL_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO) - -################################################################## -##### PERL 5 ###### -################################################################## - -# You need to set this variable to the Perl5 directory containing the -# files "perl.h", "EXTERN.h" and "XSUB.h". With Perl5.003, it's -# usually something like /usr/local/lib/perl5/arch-osname/5.003/CORE. - -PERL5_INCLUDE= /usr/lib/perl5/5.6.1/i386-linux/CORE - -# Extra Perl specific dynamic linking options -PERL5_DLNK = - -# ---------------------------------------------------------------- -# Build a Perl5 dynamically loadable module (C) -# ---------------------------------------------------------------- - -perl5: $(SRCS) - $(SWIG) -perl5 $(SWIGOPT) $(INTERFACE) - $(CC) -c -Dbool=char $(CCSHARED) $(CFLAGS) -DSWIG $(SRCS) $(ISRCS) $(INCLUDE) -I$(PERL5_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(PERL5_DLNK) $(LIBS) -o $(TARGET)$(SO) - -# ---------------------------------------------------------------- -# Build a Perl5 dynamically loadable module (C++) -# ---------------------------------------------------------------- - -perl5_cpp: $(SRCS) - $(SWIG) -perl5 -c++ $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) -DSWIG -Dexplicit= $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) -I$(PERL5_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(PERL5_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO) - -# ---------------------------------------------------------------- -# Build a Perl5 dynamically loadable module, linked against SWIG runtime lib -# ---------------------------------------------------------------- - -PERL5_RUNTIME=-L$(RUNTIMEDIR) -lswigpl - -perl5_multi: $(SRCS) - $(SWIG) -c -perl5 $(SWIGOPT) $(INTERFACE) - $(CC) -c -DSWIG -Dbool=char $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) -I$(PERL5_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(PERL5_RUNTIME) $(PERL5_DLNK) $(LIBS) -o $(TARGET)$(SO) - -perl5_multi_cpp: $(SRCS) - $(SWIG) -c -perl5 -c++ $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) -DSWIG -Dexplicit= $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) -I$(PERL5_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(PERL5_RUNTIME) $(PERL5_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO) - -# ---------------------------------------------------------------- -# Build a module from existing XS C source code. (ie. from xsubpp). -# ---------------------------------------------------------------- -perl5_xs: $(SRCS) - $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(INCLUDE) -I$(PERL5_INCLUDE) - $(LDSHARED) $(OBJS) $(LIBS) -o $(TARGET)$(SO) - -# ---------------------------------------------------------------- -# Build a statically linked Perl5 executable -# ---------------------------------------------------------------- - -PERL5_LIB = -L$(PERL5_INCLUDE) -lperl.so -ldl $(SYSLIBS) - -perl5_static: $(SRCS) - $(SWIG) -perl5 -static -lperlmain.i $(SWIGOPT) $(INTERFACE) - $(CC) $(CFLAGS) -Dbool=char $(SRCS) $(ISRCS) $(INCLUDE) -I$(PERL5_INCLUDE) $(PERL5_LIB) $(LIBS) -o $(TARGET) - -perl5_static_cpp: $(SRCS) - $(SWIG) -perl5 -c++ -static -lperlmain.i $(SWIGOPT) $(INTERFACE) - $(CXX) $(CFLAGS) -Dexplicit= $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) -I$(PERL5_INCLUDE) $(PERL5_LIB) $(LIBS) -o $(TARGET) - - -################################################################## -##### PYTHON ###### -################################################################## - -# Make sure these locate your Python installation -PYTHON_INCLUDE= -DHAVE_CONFIG_H -PYTHON_LIB = - -# Extra Python specific dynamic linking options -PYTHON_DLNK = - -# ---------------------------------------------------------------- -# Build a C dynamically loadable module -# ---------------------------------------------------------------- - -python: $(SRCS) - $(SWIG) -python $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(PYTHON_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) -o $(TARGET)module$(SO) - -# ----------------------------------------------------------------- -# Build a C++ dynamically loadable module -# ----------------------------------------------------------------- - -python_cpp: $(SRCS) - $(SWIG) -c++ -python $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(PYTHON_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(PYTHON_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)module$(SO) - -# ----------------------------------------------------------------- -# Build a dynamically loadable module, linked against SWIG Runtime lib -# ----------------------------------------------------------------- - -PYTHON_RUNTIME=-L$(RUNTIMEDIR) -lswigpy - -python_multi: $(SRCS) - $(SWIG) -c -python $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(PYTHON_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(PYTHON_RUNTIME) $(PYTHON_DLNK) $(LIBS) -o $(TARGET)module$(SO) - -python_multi_cpp: $(SRCS) - $(SWIG) -c -c++ -python $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(PYTHON_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(PYTHON_RUNTIME) $(PYTHON_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)module$(SO) - - -# ----------------------------------------------------------------- -# Build statically linked Python interpreter -# -# These should only be used in conjunction with the %include embed.i -# library file -# ----------------------------------------------------------------- - -#TKINTER = -L/usr/X11R6.3/lib -L/usr/local/compat/lib -ltk4.0 -ltcl7.4 -lX11 -TKINTER = -PYTHON_LIBOPTS = -lpython2.2 -ldl $(TKINTER) $(SYSLIBS) - -python_static: $(SRCS) - $(SWIG) -python -lembed.i $(SWIGOPT) $(INTERFACE) - $(CC) $(CFLAGS) -Xlinker -export-dynamic $(ISRCS) $(SRCS) $(INCLUDE) \ - $(PYTHON_INCLUDE) $(LIBS) -L$(PYTHON_LIB) $(PYTHON_LIBOPTS) -o $(TARGET) - -python_static_cpp: $(SRCS) - $(SWIG) -c++ -python -lembed.i $(SWIGOPT) $(INTERFACE) - $(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) \ - $(PYTHON_INCLUDE) $(LIBS) -L$(PYTHON_LIB) $(PYTHON_LIBOPTS) -o $(TARGET) - -# ----------------------------------------------------------------- -# Cleaning the python examples -# ----------------------------------------------------------------- - -python_clean: - rm -f *_wrap* *.o *~ *$(SO) mypython *.pyc .~* core - -################################################################## -##### GUILE ###### -################################################################## - -# Make sure these locate your Guile installation -GUILE_INCLUDE = -GUILE_LIB = - -# ---------------------------------------------------------------- -# Build a C dynamically loadable module -# ---------------------------------------------------------------- - -guile: $(SRCS) - $(SWIG) -guile -Linkage ltdlmod $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ISRCS) $(SRCS) - $(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) -o lib$(TARGET)$(SO) - -# ----------------------------------------------------------------- -# Build a C++ dynamically loadable module -# ----------------------------------------------------------------- - -guile_cpp: $(SRCS) - $(SWIG) -c++ -guile -Linkage ltdlmod $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ICXXSRCS) $(SRCS) $(CXXSRCS) - $(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o lib$(TARGET)$(SO) - -# ----------------------------------------------------------------- -# Build a dynamically loadable module with passive linkage -# ----------------------------------------------------------------- - -guile_passive: $(SRCS) - $(SWIG) -guile -Linkage passive $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ISRCS) $(SRCS) - $(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) -o lib$(TARGET)$(SO) - -guile_passive_cpp: $(SRCS) - $(SWIG) -c++ -guile -Linkage passive $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ICXXSRCS) $(SRCS) $(CXXSRCS) - $(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o lib$(TARGET)$(SO) - -# ----------------------------------------------------------------- -# Build a dynamically loadable module with passive linkage, -# linked against SWIG runtime lib -# ----------------------------------------------------------------- - -GUILE_RUNTIME=-L$(RUNTIMEDIR) -lswigguile - -guile_passive_multi: $(SRCS) - $(SWIG) -c -guile -Linkage passive $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ISRCS) $(SRCS) - $(LDSHARED) $(OBJS) $(IOBJS) $(GUILE_RUNTIME) $(LIBS) -o lib$(TARGET)$(SO) - -guile_passive_multi_cpp: $(SRCS) - $(SWIG) -c -c++ -guile -Linkage passive $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(INCLUDE) $(GUILE_INCLUDE) $(ICXXSRCS) $(SRCS) $(CXXSRCS) - $(CXXSHARED) $(OBJS) $(IOBJS) $(GUILE_RUNTIME) $(LIBS) $(CPP_DLLIBS) -o lib$(TARGET)$(SO) - -# ----------------------------------------------------------------- -# Build statically linked Guile interpreter -# ----------------------------------------------------------------- - -GUILE_LIBOPTS = -ldl $(SYSLIBS) - -guile_static: $(SRCS) - $(SWIG) -guile -lguilemain.i -Linkage ltdlmod $(SWIGOPT) $(INTERFACE) - $(CC) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) \ - -DSWIGINIT="SCM scm_init_$(TARGET)_module(void); scm_init_$(TARGET)_module();" \ - $(GUILE_INCLUDE) $(LIBS) -L$(GUILE_LIB) $(GUILE_LIBOPTS) -o $(TARGET)-guile - -guile_static_cpp: $(SRCS) - $(SWIG) -c++ -guile -lguilemain.i -Linkage ltdlmod $(SWIGOPT) $(INTERFACE) - $(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) \ - -DSWIGINIT="SCM scm_init_$(TARGET)_module(void); scm_init_$(TARGET)_module();" \ - $(GUILE_INCLUDE) $(LIBS) -L$(GUILE_LIB) $(GUILE_LIBOPTS) -o $(TARGET)-guile - -guile_simple: $(SRCS) - $(SWIG) -guile -lguilemain.i -Linkage simple $(SWIGOPT) $(INTERFACE) - $(CC) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) \ - $(GUILE_INCLUDE) $(LIBS) -L$(GUILE_LIB) $(GUILE_LIBOPTS) -o $(TARGET)-guile - -guile_simple_cpp: $(SRCS) - $(SWIG) -c++ -guile -lguilemain.i -Linkage simple $(SWIGOPT) $(INTERFACE) - $(CXX) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) \ - $(GUILE_INCLUDE) $(LIBS) -L$(GUILE_LIB) $(GUILE_LIBOPTS) -o $(TARGET)-guile - -################################################################## -##### JAVA ###### -################################################################## - -# You need to set this variable to the java directories containing the -# files "jni.h" and "md.h" -# usually something like /usr/java/include and /usr/java/include/<arch-osname>. -JAVA_INCLUDE= - -# Extra Java specific dynamic linking options -JAVA_DLNK = -JAVALIBPREFIX = lib - -# ---------------------------------------------------------------- -# Build a java dynamically loadable module (C) -# ---------------------------------------------------------------- - -java: $(SRCS) - $(SWIG) -java $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(JAVA_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) -o $(JAVALIBPREFIX)$(TARGET)$(SO) - -# ---------------------------------------------------------------- -# Build a java dynamically loadable module (C++) -# ---------------------------------------------------------------- - -java_cpp: $(SRCS) - $(SWIG) -java -c++ $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(JAVA_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(JAVALIBPREFIX)$(TARGET)$(SO) - -# ---------------------------------------------------------------- -# Build a java dynamically loadable module -# ---------------------------------------------------------------- - -java_multi: $(SRCS) - $(SWIG) -java $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(JAVA_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) -o $(JAVALIBPREFIX)$(TARGET)$(SO) - -java_multi_cpp: $(SRCS) - $(SWIG) -java -c++ $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(JAVA_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(JAVA_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(JAVALIBPREFIX)$(TARGET)$(SO) - -# ----------------------------------------------------------------- -# Cleaning the java examples -# ----------------------------------------------------------------- - -java_clean: - mv main.java main.java.tmp - rm -f *_wrap* *.o core *~ *$(SO) *.class *.java - mv main.java.tmp main.java - -################################################################## -##### MZSCHEME ###### -################################################################## - -MZC = test -n "" && - -# ---------------------------------------------------------------- -# Build a C/C++ dynamically loadable module -# ---------------------------------------------------------------- - -mzscheme: $(SRCS) - $(SWIG) -mzscheme $(SWIGOPT) $(INTERFACE) - $(MZC) ++ccf "$(INCLUDE)" --cc $(ISRCS) $(SRCS) - $(MZC) --ld $(TARGET)$(SO) $(OBJS) $(IOBJS) - -mzscheme_cpp: $(SRCS) - $(SWIG) -mzscheme -c++ $(SWIGOPT) $(INTERFACE) - $(MZC) ++ccf "$(INCLUDE)" --cc $(ICXXSRCS) $(SRCS) $(CXXSRCS) - $(MZC) --ld $(TARGET)$(SO) $(OBJS) $(IOBJS) $(CPP_DLLIBS) - -# ---------------------------------------------------------------- -# Build a dynamically loadable module, linked against SWIG runtime -# ---------------------------------------------------------------- - -MZSCHEME_RUNTIME=-L$(RUNTIMEDIR) -lswigmz - -mzscheme_multi: $(SRCS) - $(SWIG) -c -mzscheme $(SWIGOPT) $(INTERFACE) - $(MZC) ++ccf "$(INCLUDE)" --cc $(ISRCS) $(SRCS) - $(MZC) --ld $(TARGET)$(SO) $(OBJS) $(IOBJS) $(MZSCHEME_RUNTIME) - -mzscheme_multi_cpp: $(SRCS) - $(SWIG) -c -mzscheme -c++ $(SWIGOPT) $(INTERFACE) - $(MZC) ++ccf "$(INCLUDE)" --cc $(ICXXSRCS) $(SRCS) $(CXXSRCS) - $(MZC) --ld $(TARGET)$(SO) $(OBJS) $(IOBJS) $(MZSCHEME_RUNTIME) $(CPP_DLLIBS) - -################################################################## -##### RUBY ###### -################################################################## - -# Make sure these locate your Ruby installation -RUBY_CFLAGS= -DHAVE_CONFIG_H -RUBY_INCLUDE= -I/usr/local/lib/ruby/1.4/arch -RUBY_LIB = /usr/local/lib/ruby/1.4/arch -RUBY_DLNK = - -# ---------------------------------------------------------------- -# Build a C dynamically loadable module -# ---------------------------------------------------------------- - -ruby: $(SRCS) - $(SWIG) -ruby $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(RUBY_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(RUBY_DLNK) $(LIBS) -o $(TARGET)$(SO) - -# ----------------------------------------------------------------- -# Build a C++ dynamically loadable module -# ----------------------------------------------------------------- - -ruby_cpp: $(SRCS) - $(SWIG) -c++ -ruby $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(RUBY_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(RUBY_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO) - -# ----------------------------------------------------------------- -# Build a dynamically loadable module, linked against SWIG runtime lib -# ----------------------------------------------------------------- - -RUBY_RUNTIME=-L$(RUNTIMEDIR) -lswigrb - -ruby_multi: $(SRCS) - $(SWIG) -c -ruby $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(RUBY_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(RUBY_RUNTIME) $(RUBY_DLNK) $(LIBS) -o $(TARGET)$(SO) - -ruby_multi_cpp: $(SRCS) - $(SWIG) -c -c++ -ruby $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(RUBY_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(RUBY_RUNTIME) $(RUBY_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO) - -# ----------------------------------------------------------------- -# Build statically linked Ruby interpreter -# -# These should only be used in conjunction with the %include embed.i -# library file -# ----------------------------------------------------------------- - -RUBY_LIBOPTS = -lruby -lm -ldl $(SYSLIBS) - -ruby_static: $(SRCS) - $(SWIG) -ruby -lembed.i $(SWIGOPT) $(INTERFACE) - $(CC) $(CFLAGS) $(RUBY_CFLAGS) -Xlinker -export-dynamic $(ISRCS) $(SRCS) $(INCLUDE) \ - $(RUBY_INCLUDE) $(LIBS) -L$(RUBY_LIB) $(RUBY_LIBOPTS) -o $(TARGET) - -ruby_cpp_static: $(SRCS) - $(SWIG) -c++ -ruby -lembed.i $(SWIGOPT) $(INTERFACE) - $(CXX) $(CFLAGS) $(RUBY_CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) \ - $(RUBY_INCLUDE) $(LIBS) -L$(RUBY_LIB) $(RUBY_LIBOPTS) -o $(TARGET) - - -# ------------------------------------------------------------------- -# Build a PHP4 dynamically loadable module (C) -# ------------------------------------------------------------------- - -PHP4_INCLUDE = - -php4: $(SRCS) - $(SWIG) -php4 $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(ISRCS) $(INCLUDE) $(PHP4_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(LIBS) -o $(TARGET)$(SO) - -# -------------------------------------------------------------------- -# Build a PHP4 dynamically loadable module (C++) -# -------------------------------------------------------------------- - -php4_cpp: $(SRCS) - $(SWIG) -php4 -c++ $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(SRCS) $(CXXSRCS) $(ICXXSRCS) $(INCLUDE) $(PHP4_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)$(SO) - -# --------------------------------------------------------------------- -# Build a dynamically loadable module, linked against SWIG Runtime lib -# --------------------------------------------------------------------- - -PHP4_RUNTIME=-L$(RUNTIMEDIR) -lswigphp4 - -php4_multi: $(SRCS) - $(SWIG) -c -php4 $(SWIGOPT) $(INTERFACE) - $(CC) -c $(CCSHARED) $(CFLAGS) $(ISRCS) $(SRCS) $(INCLUDE) $(PHP4_INCLUDE) - $(LDSHARED) $(OBJS) $(IOBJS) $(PHP4_RUNTIME) $(PHP4_DLNK) $(LIBS) -o $(TARGET)module$(SO) - -php4_multi_cpp: $(SRCS) - $(SWIG) -c -c++ -php4 $(SWIGOPT) $(INTERFACE) - $(CXX) -c $(CCSHARED) $(CFLAGS) $(ICXXSRCS) $(SRCS) $(CXXSRCS) $(INCLUDE) $(PHP4_INCLUDE) - $(CXXSHARED) $(OBJS) $(IOBJS) $(PHP4_RUNTIME) $(PHP4_DLNK) $(LIBS) $(CPP_DLLIBS) -o $(TARGET)module$(SO) |