diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/Makefile.am | 1 | ||||
-rw-r--r-- | include/internal/regex/regex.h | 561 | ||||
-rw-r--r-- | include/osiswebif.h | 3 | ||||
-rw-r--r-- | include/osisxhtml.h | 6 | ||||
-rw-r--r-- | include/swmodule.h | 12 | ||||
-rw-r--r-- | include/zlib.h | 893 |
6 files changed, 1472 insertions, 4 deletions
diff --git a/include/Makefile.am b/include/Makefile.am index de34949..cd7cec0 100644 --- a/include/Makefile.am +++ b/include/Makefile.am @@ -61,6 +61,7 @@ pkginclude_HEADERS += $(swincludedir)/osisstrongs.h pkginclude_HEADERS += $(swincludedir)/osisfootnotes.h pkginclude_HEADERS += $(swincludedir)/osislemma.h pkginclude_HEADERS += $(swincludedir)/osisredletterwords.h +pkginclude_HEADERS += $(swincludedir)/osisreferencelinks.h pkginclude_HEADERS += $(swincludedir)/osisscripref.h pkginclude_HEADERS += $(swincludedir)/osiswordjs.h pkginclude_HEADERS += $(swincludedir)/osisvariants.h diff --git a/include/internal/regex/regex.h b/include/internal/regex/regex.h new file mode 100644 index 0000000..79d6586 --- /dev/null +++ b/include/internal/regex/regex.h @@ -0,0 +1,561 @@ +/* Definitions for data structures and routines for the regular + expression library, version 0.12. + Copyright (C) 1985,1989-1993,1995-1998, 2000 Free Software Foundation, Inc. + This file is part of the GNU C Library. Its master source is NOT part of + the C library, however. The master source lives in /gd/gnu/lib. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef _REGEX_H +#define _REGEX_H 1 + +/* Allow the use in C++ code. */ +#ifdef __cplusplus +extern "C" { +#endif + +/* POSIX says that <sys/types.h> must be included (by the caller) before + <regex.h>. */ + +#if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS +/* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it + should be there. */ +# include <stddef.h> +#endif + +/* The following two types have to be signed and unsigned integer type + wide enough to hold a value of a pointer. For most ANSI compilers + ptrdiff_t and size_t should be likely OK. Still size of these two + types is 2 for Microsoft C. Ugh... */ +typedef long int s_reg_t; +typedef unsigned long int active_reg_t; + +/* The following bits are used to determine the regexp syntax we + recognize. The set/not-set meanings are chosen so that Emacs syntax + remains the value 0. The bits are given in alphabetical order, and + the definitions shifted by one from the previous bit; thus, when we + add or remove a bit, only one other definition need change. */ +typedef unsigned long int reg_syntax_t; + +/* If this bit is not set, then \ inside a bracket expression is literal. + If set, then such a \ quotes the following character. */ +#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1) + +/* If this bit is not set, then + and ? are operators, and \+ and \? are + literals. + If set, then \+ and \? are operators and + and ? are literals. */ +#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1) + +/* If this bit is set, then character classes are supported. They are: + [:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:], + [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:]. + If not set, then character classes are not supported. */ +#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1) + +/* If this bit is set, then ^ and $ are always anchors (outside bracket + expressions, of course). + If this bit is not set, then it depends: + ^ is an anchor if it is at the beginning of a regular + expression or after an open-group or an alternation operator; + $ is an anchor if it is at the end of a regular expression, or + before a close-group or an alternation operator. + + This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because + POSIX draft 11.2 says that * etc. in leading positions is undefined. + We already implemented a previous draft which made those constructs + invalid, though, so we haven't changed the code back. */ +#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1) + +/* If this bit is set, then special characters are always special + regardless of where they are in the pattern. + If this bit is not set, then special characters are special only in + some contexts; otherwise they are ordinary. Specifically, + * + ? and intervals are only special when not after the beginning, + open-group, or alternation operator. */ +#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1) + +/* If this bit is set, then *, +, ?, and { cannot be first in an re or + immediately after an alternation or begin-group operator. */ +#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1) + +/* If this bit is set, then . matches newline. + If not set, then it doesn't. */ +#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1) + +/* If this bit is set, then . doesn't match NUL. + If not set, then it does. */ +#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1) + +/* If this bit is set, nonmatching lists [^...] do not match newline. + If not set, they do. */ +#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1) + +/* If this bit is set, either \{...\} or {...} defines an + interval, depending on RE_NO_BK_BRACES. + If not set, \{, \}, {, and } are literals. */ +#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1) + +/* If this bit is set, +, ? and | aren't recognized as operators. + If not set, they are. */ +#define RE_LIMITED_OPS (RE_INTERVALS << 1) + +/* If this bit is set, newline is an alternation operator. + If not set, newline is literal. */ +#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1) + +/* If this bit is set, then `{...}' defines an interval, and \{ and \} + are literals. + If not set, then `\{...\}' defines an interval. */ +#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1) + +/* If this bit is set, (...) defines a group, and \( and \) are literals. + If not set, \(...\) defines a group, and ( and ) are literals. */ +#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1) + +/* If this bit is set, then \<digit> matches <digit>. + If not set, then \<digit> is a back-reference. */ +#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1) + +/* If this bit is set, then | is an alternation operator, and \| is literal. + If not set, then \| is an alternation operator, and | is literal. */ +#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1) + +/* If this bit is set, then an ending range point collating higher + than the starting range point, as in [z-a], is invalid. + If not set, then when ending range point collates higher than the + starting range point, the range is ignored. */ +#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1) + +/* If this bit is set, then an unmatched ) is ordinary. + If not set, then an unmatched ) is invalid. */ +#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1) + +/* If this bit is set, succeed as soon as we match the whole pattern, + without further backtracking. */ +#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1) + +/* If this bit is set, do not process the GNU regex operators. + If not set, then the GNU regex operators are recognized. */ +#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1) + +/* If this bit is set, turn on internal regex debugging. + If not set, and debugging was on, turn it off. + This only works if regex.c is compiled -DDEBUG. + We define this bit always, so that all that's needed to turn on + debugging is to recompile regex.c; the calling code can always have + this bit set, and it won't affect anything in the normal case. */ +#define RE_DEBUG (RE_NO_GNU_OPS << 1) + +/* If this bit is set, a syntactically invalid interval is treated as + a string of ordinary characters. For example, the ERE 'a{1' is + treated as 'a\{1'. */ +#define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1) + +/* This global variable defines the particular regexp syntax to use (for + some interfaces). When a regexp is compiled, the syntax used is + stored in the pattern buffer, so changing this does not affect + already-compiled regexps. */ +extern reg_syntax_t re_syntax_options; + +/* Define combinations of the above bits for the standard possibilities. + (The [[[ comments delimit what gets put into the Texinfo file, so + don't delete them!) */ +/* [[[begin syntaxes]]] */ +#define RE_SYNTAX_EMACS 0 + +#define RE_SYNTAX_AWK \ + (RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \ + | RE_NO_BK_PARENS | RE_NO_BK_REFS \ + | RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \ + | RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \ + | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS) + +#define RE_SYNTAX_GNU_AWK \ + ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \ + & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS)) + +#define RE_SYNTAX_POSIX_AWK \ + (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \ + | RE_INTERVALS | RE_NO_GNU_OPS) + +#define RE_SYNTAX_GREP \ + (RE_BK_PLUS_QM | RE_CHAR_CLASSES \ + | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \ + | RE_NEWLINE_ALT) + +#define RE_SYNTAX_EGREP \ + (RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \ + | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \ + | RE_NEWLINE_ALT | RE_NO_BK_PARENS \ + | RE_NO_BK_VBAR) + +#define RE_SYNTAX_POSIX_EGREP \ + (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES \ + | RE_INVALID_INTERVAL_ORD) + +/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */ +#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC + +#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC + +/* Syntax bits common to both basic and extended POSIX regex syntax. */ +#define _RE_SYNTAX_POSIX_COMMON \ + (RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \ + | RE_INTERVALS | RE_NO_EMPTY_RANGES) + +#define RE_SYNTAX_POSIX_BASIC \ + (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM) + +/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes + RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this + isn't minimal, since other operators, such as \`, aren't disabled. */ +#define RE_SYNTAX_POSIX_MINIMAL_BASIC \ + (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS) + +#define RE_SYNTAX_POSIX_EXTENDED \ + (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ + | RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \ + | RE_NO_BK_PARENS | RE_NO_BK_VBAR \ + | RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD) + +/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is + removed and RE_NO_BK_REFS is added. */ +#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \ + (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \ + | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \ + | RE_NO_BK_PARENS | RE_NO_BK_REFS \ + | RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD) +/* [[[end syntaxes]]] */ + +/* Maximum number of duplicates an interval can allow. Some systems + (erroneously) define this in other header files, but we want our + value, so remove any previous define. */ +#ifdef RE_DUP_MAX +# undef RE_DUP_MAX +#endif +/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows. */ +#define RE_DUP_MAX (0x7fff) + + +/* POSIX `cflags' bits (i.e., information for `regcomp'). */ + +/* If this bit is set, then use extended regular expression syntax. + If not set, then use basic regular expression syntax. */ +#define REG_EXTENDED 1 + +/* If this bit is set, then ignore case when matching. + If not set, then case is significant. */ +#define REG_ICASE (REG_EXTENDED << 1) + +/* If this bit is set, then anchors do not match at newline + characters in the string. + If not set, then anchors do match at newlines. */ +#define REG_NEWLINE (REG_ICASE << 1) + +/* If this bit is set, then report only success or fail in regexec. + If not set, then returns differ between not matching and errors. */ +#define REG_NOSUB (REG_NEWLINE << 1) + + +/* POSIX `eflags' bits (i.e., information for regexec). */ + +/* If this bit is set, then the beginning-of-line operator doesn't match + the beginning of the string (presumably because it's not the + beginning of a line). + If not set, then the beginning-of-line operator does match the + beginning of the string. */ +#define REG_NOTBOL 1 + +/* Like REG_NOTBOL, except for the end-of-line. */ +#define REG_NOTEOL (1 << 1) + + +/* If any error codes are removed, changed, or added, update the + `re_error_msg' table in regex.c. */ +typedef enum +{ +#ifdef _XOPEN_SOURCE + REG_ENOSYS = -1, /* This will never happen for this implementation. */ +#endif + + REG_NOERROR = 0, /* Success. */ + REG_NOMATCH, /* Didn't find a match (for regexec). */ + + /* POSIX regcomp return error codes. (In the order listed in the + standard.) */ + REG_BADPAT, /* Invalid pattern. */ + REG_ECOLLATE, /* Not implemented. */ + REG_ECTYPE, /* Invalid character class name. */ + REG_EESCAPE, /* Trailing backslash. */ + REG_ESUBREG, /* Invalid back reference. */ + REG_EBRACK, /* Unmatched left bracket. */ + REG_EPAREN, /* Parenthesis imbalance. */ + REG_EBRACE, /* Unmatched \{. */ + REG_BADBR, /* Invalid contents of \{\}. */ + REG_ERANGE, /* Invalid range end. */ + REG_ESPACE, /* Ran out of memory. */ + REG_BADRPT, /* No preceding re for repetition op. */ + + /* Error codes we've added. */ + REG_EEND, /* Premature end. */ + REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */ + REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */ +} reg_errcode_t; + +/* This data structure represents a compiled pattern. Before calling + the pattern compiler, the fields `buffer', `allocated', `fastmap', + `translate', and `no_sub' can be set. After the pattern has been + compiled, the `re_nsub' field is available. All other fields are + private to the regex routines. */ + +#ifndef RE_TRANSLATE_TYPE +# define RE_TRANSLATE_TYPE char * +#endif + +struct re_pattern_buffer +{ +/* [[[begin pattern_buffer]]] */ + /* Space that holds the compiled pattern. It is declared as + `unsigned char *' because its elements are + sometimes used as array indexes. */ + unsigned char *buffer; + + /* Number of bytes to which `buffer' points. */ + unsigned long int allocated; + + /* Number of bytes actually used in `buffer'. */ + unsigned long int used; + + /* Syntax setting with which the pattern was compiled. */ + reg_syntax_t syntax; + + /* Pointer to a fastmap, if any, otherwise zero. re_search uses + the fastmap, if there is one, to skip over impossible + starting points for matches. */ + char *fastmap; + + /* Either a translate table to apply to all characters before + comparing them, or zero for no translation. The translation + is applied to a pattern when it is compiled and to a string + when it is matched. */ + RE_TRANSLATE_TYPE translate; + + /* Number of subexpressions found by the compiler. */ + size_t re_nsub; + + /* Zero if this pattern cannot match the empty string, one else. + Well, in truth it's used only in `re_search_2', to see + whether or not we should use the fastmap, so we don't set + this absolutely perfectly; see `re_compile_fastmap' (the + `duplicate' case). */ + unsigned can_be_null : 1; + + /* If REGS_UNALLOCATED, allocate space in the `regs' structure + for `max (RE_NREGS, re_nsub + 1)' groups. + If REGS_REALLOCATE, reallocate space if necessary. + If REGS_FIXED, use what's there. */ +#define REGS_UNALLOCATED 0 +#define REGS_REALLOCATE 1 +#define REGS_FIXED 2 + unsigned regs_allocated : 2; + + /* Set to zero when `regex_compile' compiles a pattern; set to one + by `re_compile_fastmap' if it updates the fastmap. */ + unsigned fastmap_accurate : 1; + + /* If set, `re_match_2' does not return information about + subexpressions. */ + unsigned no_sub : 1; + + /* If set, a beginning-of-line anchor doesn't match at the + beginning of the string. */ + unsigned not_bol : 1; + + /* Similarly for an end-of-line anchor. */ + unsigned not_eol : 1; + + /* If true, an anchor at a newline matches. */ + unsigned newline_anchor : 1; + +/* [[[end pattern_buffer]]] */ +}; + +typedef struct re_pattern_buffer regex_t; + +/* Type for byte offsets within the string. POSIX mandates this. */ +typedef int regoff_t; + + +/* This is the structure we store register match data in. See + regex.texinfo for a full description of what registers match. */ +struct re_registers +{ + unsigned num_regs; + regoff_t *start; + regoff_t *end; +}; + + +/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer, + `re_match_2' returns information about at least this many registers + the first time a `regs' structure is passed. */ +#ifndef RE_NREGS +# define RE_NREGS 30 +#endif + + +/* POSIX specification for registers. Aside from the different names than + `re_registers', POSIX uses an array of structures, instead of a + structure of arrays. */ +typedef struct +{ + regoff_t rm_so; /* Byte offset from string's start to substring's start. */ + regoff_t rm_eo; /* Byte offset from string's start to substring's end. */ +} regmatch_t; + +/* Declarations for routines. */ + +/* To avoid duplicating every routine declaration -- once with a + prototype (if we are ANSI), and once without (if we aren't) -- we + use the following macro to declare argument types. This + unfortunately clutters up the declarations a bit, but I think it's + worth it. */ + +#ifndef __STDC__ +#define __STDC__ 1 +#endif + +#if __STDC__ + +# define _RE_ARGS(args) args + +#else /* not __STDC__ */ + +# define _RE_ARGS(args) () + +#endif /* not __STDC__ */ + +/* Sets the current default syntax to SYNTAX, and return the old syntax. + You can also simply assign to the `re_syntax_options' variable. */ +extern reg_syntax_t re_set_syntax _RE_ARGS ((reg_syntax_t syntax)); + +/* Compile the regular expression PATTERN, with length LENGTH + and syntax given by the global `re_syntax_options', into the buffer + BUFFER. Return NULL if successful, and an error string if not. */ +extern const char *re_compile_pattern + _RE_ARGS ((const char *pattern, size_t length, + struct re_pattern_buffer *buffer)); + + +/* Compile a fastmap for the compiled pattern in BUFFER; used to + accelerate searches. Return 0 if successful and -2 if was an + internal error. */ +extern int re_compile_fastmap _RE_ARGS ((struct re_pattern_buffer *buffer)); + + +/* Search in the string STRING (with length LENGTH) for the pattern + compiled into BUFFER. Start searching at position START, for RANGE + characters. Return the starting position of the match, -1 for no + match, or -2 for an internal error. Also return register + information in REGS (if REGS and BUFFER->no_sub are nonzero). */ +extern int re_search + _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string, + int length, int start, int range, struct re_registers *regs)); + + +/* Like `re_search', but search in the concatenation of STRING1 and + STRING2. Also, stop searching at index START + STOP. */ +extern int re_search_2 + _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1, + int length1, const char *string2, int length2, + int start, int range, struct re_registers *regs, int stop)); + + +/* Like `re_search', but return how many characters in STRING the regexp + in BUFFER matched, starting at position START. */ +extern int re_match + _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string, + int length, int start, struct re_registers *regs)); + + +/* Relates to `re_match' as `re_search_2' relates to `re_search'. */ +extern int re_match_2 + _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1, + int length1, const char *string2, int length2, + int start, struct re_registers *regs, int stop)); + + +/* Set REGS to hold NUM_REGS registers, storing them in STARTS and + ENDS. Subsequent matches using BUFFER and REGS will use this memory + for recording register information. STARTS and ENDS must be + allocated with malloc, and must each be at least `NUM_REGS * sizeof + (regoff_t)' bytes long. + + If NUM_REGS == 0, then subsequent matches should allocate their own + register data. + + Unless this function is called, the first search or match using + PATTERN_BUFFER will allocate its own register data, without + freeing the old data. */ +extern void re_set_registers + _RE_ARGS ((struct re_pattern_buffer *buffer, struct re_registers *regs, + unsigned num_regs, regoff_t *starts, regoff_t *ends)); + +#if defined _REGEX_RE_COMP || defined _LIBC +# ifndef _CRAY +/* 4.2 bsd compatibility. */ +extern char *re_comp _RE_ARGS ((const char *)); +extern int re_exec _RE_ARGS ((const char *)); +# endif +#endif + +/* GCC 2.95 and later have "__restrict"; C99 compilers have + "restrict", and "configure" may have defined "restrict". */ +#ifndef __restrict +# if ! (2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__)) +# if defined restrict || 199901L <= __STDC_VERSION__ +# define __restrict restrict +# else +# define __restrict +# endif +# endif +#endif +/* For now unconditionally define __restrict_arr to expand to nothing. + Ideally we would have a test for the compiler which allows defining + it to restrict. */ +#define __restrict_arr + +/* POSIX compatibility. */ +extern int regcomp _RE_ARGS ((regex_t *__restrict __preg, + const char *__restrict __pattern, + int __cflags)); + +extern int regexec _RE_ARGS ((const regex_t *__restrict __preg, + const char *__restrict __string, size_t __nmatch, + regmatch_t __pmatch[__restrict_arr], + int __eflags)); + +extern size_t regerror _RE_ARGS ((int __errcode, const regex_t *__preg, + char *__errbuf, size_t __errbuf_size)); + +extern void regfree _RE_ARGS ((regex_t *__preg)); + + +#ifdef __cplusplus +} +#endif /* C++ */ + +#endif /* regex.h */ diff --git a/include/osiswebif.h b/include/osiswebif.h index c58a379..66d3b69 100644 --- a/include/osiswebif.h +++ b/include/osiswebif.h @@ -2,7 +2,7 @@ * * osiswebif.h - Implementation of OSISWEBIF * - * $Id: osiswebif.h 2833 2013-06-29 06:40:28Z chrislit $ + * $Id: osiswebif.h 3285 2014-12-03 06:14:50Z greg.hellings $ * * Copyright 2003-2013 CrossWire Bible Society (http://www.crosswire.org) * CrossWire Bible Society @@ -35,6 +35,7 @@ class SWDLLEXPORT OSISWEBIF : public OSISXHTML { bool javascript; protected: + virtual BasicFilterUserData *createUserData(const SWModule *module, const SWKey *key); virtual bool handleToken(SWBuf &buf, const char *token, BasicFilterUserData *userData); public: OSISWEBIF(); diff --git a/include/osisxhtml.h b/include/osisxhtml.h index 4065dcc..0f20893 100644 --- a/include/osisxhtml.h +++ b/include/osisxhtml.h @@ -2,7 +2,7 @@ * * osisxhtml.h - Render filter for classed XHTML of an OSIS module * - * $Id: osisxhtml.h 2833 2013-06-29 06:40:28Z chrislit $ + * $Id: osisxhtml.h 3285 2014-12-03 06:14:50Z greg.hellings $ * * Copyright 2011-2013 CrossWire Bible Society (http://www.crosswire.org) * CrossWire Bible Society @@ -36,11 +36,11 @@ private: protected: class TagStack; - // used by derived classes so we have it in the header virtual BasicFilterUserData *createUserData(const SWModule *module, const SWKey *key); virtual bool handleToken(SWBuf &buf, const char *token, BasicFilterUserData *userData); + // used by derived classes so we have it in the header class MyUserData : public BasicFilterUserData { public: bool osisQToTick; @@ -49,6 +49,8 @@ protected: int suspendLevel; SWBuf wordsOfChristStart; SWBuf wordsOfChristEnd; + SWBuf interModuleLinkStart; + SWBuf interModuleLinkEnd; TagStack *quoteStack; TagStack *hiStack; TagStack *titleStack; diff --git a/include/swmodule.h b/include/swmodule.h index 9c733dc..7bbdd32 100644 --- a/include/swmodule.h +++ b/include/swmodule.h @@ -4,7 +4,7 @@ * all types of modules (e.g. texts, commentaries, maps, * lexicons, etc.) * - * $Id: swmodule.h 2944 2013-08-03 09:43:40Z scribe $ + * $Id: swmodule.h 3287 2014-12-03 06:16:12Z greg.hellings $ * * Copyright 1997-2013 CrossWire Bible Society (http://www.crosswire.org) * CrossWire Bible Society @@ -194,6 +194,16 @@ public: // are not comfortable with, or don't wish to use stl maps). virtual void setConfig(ConfigEntMap *config); virtual const ConfigEntMap &getConfig() const { return *config; } + + /** + * Gets a configuration property about a module. These entries are primarily + * pulled from the module's .conf file, but also includes some virtual entries + * such as: + * PrefixPath - the absolute filesystem path to the sword module repository + * location where this module is located. + * AbsoluteDataPath - the full path to the root folder where the module + * data is stored. + */ virtual const char *getConfigEntry(const char *key) const; /** diff --git a/include/zlib.h b/include/zlib.h new file mode 100644 index 0000000..52cb529 --- /dev/null +++ b/include/zlib.h @@ -0,0 +1,893 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.1.4, March 11th, 2002 + + Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +#ifndef _ZLIB_H +#define _ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.1.4" + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms will be added later and will have the same + stream interface. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: ascii or binary */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +/* Allowed flush values; see deflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_ASCII 1 +#define Z_UNKNOWN 2 +/* Possible values of the data_type field */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + the compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + 0.1% larger than avail_in plus 12 bytes. If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update data_type if it can make a good guess about + the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may some + introduce some output latency (reading input without producing any output) + except when forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much + output as possible to the output buffer. The flushing behavior of inflate is + not specified for values of the flush parameter other than Z_SYNC_FLUSH + and Z_FINISH, but the current implementation actually flushes as much output + as possible anyway. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. + + If a preset dictionary is needed at this point (see inflateSetDictionary + below), inflate sets strm-adler to the adler32 checksum of the + dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise + it sets strm->adler to the adler32 checksum of all output produced + so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or + an error code as described below. At the end of the stream, inflate() + checks that its computed adler32 checksum is equal to that saved by the + compressor and returns Z_STREAM_END only if the checksum is correct. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect + adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent + (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if no progress is possible or if there was not + enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR + case, the application may then call inflateSync to look for a good + compression block. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match). Filtered data consists mostly of small values with a + somewhat random distribution. In this case, the compression algorithm is + tuned to compress them better. The effect of Z_FILTERED is to force more + Huffman coding and less string matching; it is somewhat intermediate + between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects + the compression ratio but not the correctness of the compressed output even + if it is not set appropriately. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front. + + Upon return of this function, strm->adler is set to the Adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. If a compressed stream with a larger window size is given as + input, inflate() will return with the error code Z_DATA_ERROR instead of + trying to allocate a larger window. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative + memLevel). msg is set to null if there is no error message. inflateInit2 + does not perform any decompression apart from reading the zlib header if + present: this will be done by inflate(). (So next_in and avail_in may be + modified, but next_out and avail_out are unchanged.) +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate + if this call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the Adler32 value returned by this call of + inflate. The compressor and decompressor must use exactly the same + dictionary (see deflateSetDictionary). + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least 0.1% larger than + sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the + compressed buffer. + This function can be used to compress a whole file at once if the + input file is mmap'ed. + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least 0.1% larger than sourceLen plus + 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted. +*/ + + +typedef voidp gzFile; + +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); +/* + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for + Huffman only compression as in "wb1h". (See the description + of deflateInit2 for more information about the strategy parameter.) + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. + + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). */ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. + The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). + gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. + gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). */ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + const voidp buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +*/ + +ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or + a newline character is read and transferred to buf, or an end-of-file + condition is encountered. The string is then terminated with a null + character. + gzgets returns buf, or Z_NULL in case of error. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. + gzflush should be called only when strictly necessary because it can + degrade compression. +*/ + +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); +/* + Sets the starting position for the next gzread or gzwrite on the + given compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); +/* + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); + +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running crc with the bytes buf[0..len-1] and return the updated + crc. If buf is NULL, this function returns the required initial value + for the crc. Pre- and post-conditioning (one's complement) is performed + within this function so it shouldn't be done by the application. + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) + + +#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; /* hack for buggy compilers */ +#endif + +ZEXTERN const char * ZEXPORT zError OF((int err)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); +ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); + +#ifdef __cplusplus +} +#endif + +#endif /* _ZLIB_H */ |