1 files changed, 57 insertions, 0 deletions
diff --git a/debian/patches/08-manpage-RFC.patch b/debian/patches/08-manpage-RFC.patch
new file mode 100644
index 0000000..86adda2
--- /dev/null
+++ b/debian/patches/08-manpage-RFC.patch
@@ -0,0 +1,57 @@
+--- a/tayga.8
++++ b/tayga.8
+@@ -1,4 +1,4 @@
+-.TH TAYGA "8" "June 2011" "TAYGA 0.9.2" ""
++.TH TAYGA "8" "Dec 2018" "TAYGA 0.9.2" ""
+ 
+ .SH NAME
+ tayga \- stateless NAT64 daemon
+@@ -19,10 +19,10 @@
+ translates them to the other protocol, and then sends the translated packets
+ back to the host using the same TUN interface.
+ .P
+-Translation is compliant with IETF Internet-Draft
+-draft-ietf-behave-v6v4-xlate-23, and address mapping is performed in
+-accordance with RFC 6052.  Optionally, TAYGA may be configured to dynamically
+-map IPv6 hosts to addresses drawn from a configured IPv4 address pool.
++Translation is compliant with IETF RFC 6145, and address mapping is
++performed in accordance with RFC 6052 or RFC 7757.  Optionally, TAYGA may be
++configured to dynamically map IPv6 hosts to addresses drawn from a
++configured IPv4 address pool.
+ .P
+ As a stateless NAT, TAYGA requires a one-to-one mapping between IPv4 addresses
+ and IPv6 addresses.  Mapping multiple IPv6 addresses onto a single IPv4
+--- a/tayga.conf.5
++++ b/tayga.conf.5
+@@ -1,4 +1,4 @@
+-.TH TAYGA.CONF "5" "June 2011" "TAYGA 0.9.2" ""
++.TH TAYGA.CONF "5" "Dec 2018" "TAYGA 0.9.2" ""
+ .SH NAME
+ tayga.conf \- configuration file of the TAYGA stateless NAT64 daemon
+ .SH DESCRIPTION
+@@ -75,12 +75,21 @@
+ .B map
+ directive.
+ .TP
+-.BI "map " "ipv4_address ipv6_address"
+-Creates a static mapping between
+-.I ipv4_address
++.BI "map " "ipv4_address[/length] ipv6_address[/length]"
++Creates a static mapping between RFC 7577 compliant hosts or subnets
++.I ipv4_address[/length]
+ and
+-.I ipv6_address
++.I ipv6_address[/length]
+ to be used when translating IPv4 packets to IPv6 or IPv6 packets to IPv4.
++If
++.I /length
++is not present,
++.I /length
++after
++.I ipv4_address
++is treated as "/32" and that of
++.I ipv6_address
++as "/128".
+ Multiple
+ .B map
+ directives are permitted in the tayga.conf file.