diff options
author | Bardur Arantsson <bardur@scientician.net> | 2015-12-29 11:10:16 +0100 |
---|---|---|
committer | Bardur Arantsson <bardur@scientician.net> | 2015-12-29 11:14:23 +0100 |
commit | 938bde7837c61582e255a6c3e539d507a8862bad (patch) | |
tree | 4b4aae5b0d0b96da70f8bbaea5240ce8e009b2ec /README.md | |
parent | 08b1ef4e6c905e8490a78c6fbbec18c3bd88afa9 (diff) |
Tweak README
Diffstat (limited to 'README.md')
-rw-r--r-- | README.md | 17 |
1 files changed, 7 insertions, 10 deletions
@@ -1,6 +1,8 @@ -# Building +## Building -## Prerequisites +### Prerequisites + +See below for specific distribution-specific hints, if needed. You will need to have the following libraries installed on your system somewhere where CMake can find them: @@ -11,15 +13,10 @@ somewhere where CMake can find them: Version requirements may vary somewhat, but usually you should be aiming for having at least a **recent** version of the above libraries. -## Using the CMake build system - -There are basically two options for ToME runs once built and the step -used to configure the build needs to incorporate the choice. - -### **Option 1:** Run ToME from the build directory +### Option 1: Running In-Place **This is currently the recommended option**, but it means that you -cannot "install" ToME as such, you just run it from the build +don't 'install' ToME as such, you just run it from the build directory. To configure for your system, run @@ -39,7 +36,7 @@ you'll get mysterious errors about ToME not being able to find files (at best). -### **Option 2:** Run ToME from a system install location +### Option 2: Installing System-Wide To configure for your system, run |